All Products
992 Results
Enquire for availability
Make an Enquiry
Alliance Memory - AS6Cxxxx Series SRAM
XProduct SKU: AS6C1008-55PCN-P
The AS6C1008 is a 1,048,57 6-bit low power CMOS static random access memory organized as 131,072 words by 8 bits. It is fabricated using very high performance, high reliability CMOS technology. Its standby current is stable within the range of operating temperature. The AS6C1008 is well designed for very low power system applications, and particularly well suited for battery back-up non-volatile memory application. The AS6C1008 operates from a single power supply of 2.7V ~ 5.5V.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Alliance Memory - AS7C3xxx Series 3V SRAM
XProduct SKU: AS7C31025B-12JIN-P
The AS7C31025B is a high-performance CMOS 1,048,576-bit Static Random Access Memory (SRAM) device organized as 131,072 x 8 bits. It is designed for memory applications where fast data access, low power, and simple interfacing are desired.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Alliance Memory - AS7Cxxx Series 5V SRAM
XProduct SKU: AS7C1024B-12JCNPBF-P
The AS7C1024B is a high performance CMOS 1,048,576-bit Static Random Access Memory (SRAM) device organized as 131,072 words x 8 bits. It is designed for memory applications where fast data access, low power, and simple interfacing are desired.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A25Lxxx Series Serial Flash
XProduct SKU: A25L010AO-F-P
The A25L020/A25L010/A25L512 are 2M/1M/512K bit Serial Flash Memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The memory is organized as 4/2/1(A25L020/A25L010/A25L512) blocks, each containing 16 sectors. Each sector is composed of 16 pages. Each page is 256 bytes wide. Thus, the whole memory can be viewed as consisting of 1024/512/256 (A25L020/A25L010/A25L512) pages, or 262,144/131,072/ 65,536 (A25L020/A25L010/A25L512) bytes. The whole memory can be erased using the Chip Erase instruction, a block at a time, using Block Erase instruction, or a sector at a time, using the Sector Erase instruction.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A25Lxxx Series Serial Flash
XProduct SKU: A25L010AO-F-P
The A25L020/A25L010/A25L512 are 2M/1M/512K bit Serial Flash Memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The memory is organized as 4/2/1(A25L020/A25L010/A25L512) blocks, each containing 16 sectors. Each sector is composed of 16 pages. Each page is 256 bytes wide. Thus, the whole memory can be viewed as consisting of 1024/512/256 (A25L020/A25L010/A25L512) pages, or 262,144/131,072/ 65,536 (A25L020/A25L010/A25L512) bytes. The whole memory can be erased using the Chip Erase instruction, a block at a time, using Block Erase instruction, or a sector at a time, using the Sector Erase instruction.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A290xx Series NOR Flash
XProduct SKU: A29010A-55F-P
The A29001A is a 5.0 volt-only Flash memory organized as 131,072 bytes of 8 bits each. The A29001A offers the RESET function, but it is not available on A290011A. The 128 Kbytes of data are further divided into seven sectors for flexible sector erase capability. The 8 bits of data appear on I/O0 - I/O7 while the addresses are input on A0 to A16. The A29001A is offered in 32-pin PLCC, PDIP and TSOP packages. This device is designed to be programmed insystem with the standard system 5.0 volt VCC supply. Additional 12.0 volt VPP is not required for in-system write or erase operations. However, the A29001A can also be programmed in standard EPROM programmers.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A290xx Series NOR Flash
XProduct SKU: A29010A-55F-P
The A29001A is a 5.0 volt-only Flash memory organized as 131,072 bytes of 8 bits each. The A29001A offers the RESET function, but it is not available on A290011A. The 128 Kbytes of data are further divided into seven sectors for flexible sector erase capability. The 8 bits of data appear on I/O0 - I/O7 while the addresses are input on A0 to A16. The A29001A is offered in 32-pin PLCC, PDIP and TSOP packages. This device is designed to be programmed insystem with the standard system 5.0 volt VCC supply. Additional 12.0 volt VPP is not required for in-system write or erase operations. However, the A29001A can also be programmed in standard EPROM programmers.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A29L0xx Series Low Power NOR Flash
XProduct SKU: A29L040AL-70F-P
The A29L040A is a 3.0 volt-only Flash memory organized as 524,288 bytes of 8 bits each. The 512 Kbytes of data are further divided into eight sectors of 64 Kbytes each for flexible sector erase capability. The 8 bits of data appear on I/O0 - I/O7 while the addresses are input on A0 to A18. The A29L040A is offered in 32-pin DIP, PLCC, TSOP (8mm x 20mm) packages. This device is designed to be programmed in-system with the standard system 3.0 volt VCC supply. Additional 12.0 volt VPP is not required for in-system write or erase operations. However, the A29L040A can also be programmed in standard EPROM programmers.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A29L0xx Series Low Power NOR Flash
XProduct SKU: A29L040AL-70F-P
The A29L040A is a 3.0 volt-only Flash memory organized as 524,288 bytes of 8 bits each. The 512 Kbytes of data are further divided into eight sectors of 64 Kbytes each for flexible sector erase capability. The 8 bits of data appear on I/O0 - I/O7 while the addresses are input on A0 to A18. The A29L040A is offered in 32-pin DIP, PLCC, TSOP (8mm x 20mm) packages. This device is designed to be programmed in-system with the standard system 3.0 volt VCC supply. Additional 12.0 volt VPP is not required for in-system write or erase operations. However, the A29L040A can also be programmed in standard EPROM programmers.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A43Lxxx Series SDRAM
XProduct SKU: A43L0616BV-6F-P
The A43L0616B is 16,777,216 bits synchronous high data rate Dynamic RAM organized as 2 X 524,288 words by 16 bits, fabricated with AMIC’s high performance CMOS technology. Synchronous design allows precise cycle control with the use of system clock. I/O transactions are possible on every clock cycle. Range of operating frequencies, programmable latencies allows the same device to be useful for a variety of high bandwidth, high performance memory system applications.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
AMIC Technology - A62xxxx Series Low Power SRAM
XProduct SKU: A623308A-70SF-P
The A623308A is a low operating current 65,536-bit static random access memory organized as 8,192 words by 8 bits and operates on a voltage from 4.5V to 5.5V. Inputs and three-state outputs are TTL compatible and allow for direct interfacing with common system bus structures. Minimum standby power is drawn by this device when CE is at a high level, independent of the other input levels. Data retention is guaranteed at a power supply voltage as low as 2.0V.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryFrom£46.95(Ex. VAT)
Enquire for availability
Make an Enquiry
From£2.65(Ex. VAT)
Antenova - Calvus Pentaband GSM/UMTS Cellular SMD Antenna
XProduct SKU: A10340H
Dimensions: 27.0 x 8.0 x 3.2 mm Frequency: 824 – 960MHz, 1710 – 2170 MHz Polarization: Linear Antenna type: SMD Calvus is a penta-band antenna that supports up to five frequency bands, including the GSM/GPRS/EDGE, CDMA2000, UMTS standards among others. This makes Calvus the perfect choice for Femto and Pico base stations, also vehicle tracking and remote monitoring applications. It uses a ground plane to radiate efficiently, but the ground plane must not be present underneath the antenna itself.
From£2.65(Ex. VAT)
Enquire for availability
Make an Enquiry
From£3.10(Ex. VAT)
Antenova - Flexi Antenna 4G LTE
XProduct SKU: SRFL026-100
Overview coming soon - Call 01527 830800 for information
Features
Antenna for 4G LTE applications including MIMO systems. LTE 700, GSM850, GSM900, DCS1800, PCS1900, WCDMA2100, LTE B7 (2500-2690 MHz), LTE B40 (2300 – 2400 MHZ) 1.13mm diameter RF cable with I-PEX MHF connector Self-adhesive mounted Quick and simple integration minimizes design cycle Available in two standard cable lengths, 100mm and 200mm, other lengths availableFrom£3.10(Ex. VAT)
Enquire for availability
Make an Enquiry
From£1.15(Ex. VAT)
Antenova - Fusca 2.4GHz WiFi/Bluetooth SMD Antenna
XProduct SKU: A10192H
Dimensions: 4.0 x 3.0 x 1.1 mm Frequencies: 2.4 - 2.5GHz Polarization: Linear Antenna type: SMD Fusca is a low-profile, highly efficient SMD antenna designed for 2.4GHz applications. It’s suitable for Bluetooth, BLE, Wi-Fi (802.11a/b/g/n), ZigBee and other applications. Fusca is the ideal antenna for compact wearable devices. The antenna uses a ground plane, but it must not extend underneath the antenna itself.
From£1.15(Ex. VAT)
Enquire for availability
Make an Enquiry
From£2.00(Ex. VAT)
Antenova - Inversa 3G/4G/LTE MIMO SMD Antenna
XProduct SKU: SR4L034-L-P
Frequency: 791-960MHz, 1710-2170MHz, 2300-2400MHz, 2500-2600MHz Dimensions: 23.0 x 8.0 x 3.3 mm Efficiency: 70% at 791-960MHz, 60% at 1710-2170MHz, 60% at 2300-2400MHz, 50% at 2500-2690MHz, Integra is a high performing diversity antenna for 4G/ LTE, and its small size makes it suitable for PCBs as small as 75mm. This antenna comes in left and right versions and can be used singly or in pairs for MIMO. It is suitable for small tracking devices, OBDs and devices where space is limited.
From£2.00(Ex. VAT)
417 In stock
Make an Enquiry
From£2.10(Ex. VAT)
Antenova - Mica 2.4GHz WiFi/BT/BLE/ZigBee SMD Antenna
XProduct SKU: A5645H
Dimensions: 20.5 x 2.6 x 3.3 mm Frequencies: 2.4 - 2.5GHz Polarization: Linear Antenna type: SMD Mica is a low-profile SMD antenna designed for 2.4GHz applications. This includes Bluetooth, BLE, Wi-Fi (802.11a/b/g/n), ZigBee and more. It’s designed for use with the ground plane extended beneath the antenna, minimising the footprint of your RF stackup, which makes this antenna perfect for compact wearables, PC-cards and sensors. Mica is available in left- and right-hand variations, allowing for maximum design flexibility.
From£2.10(Ex. VAT)
Enquire for availability
Make an Enquiry