All Products
Showing 559–576 of 1989 results
Digi Z1201 Multifunction I/O Controller
Digi Z1201 Multifunction I/O Controller
XProduct SKU: CTK-Z1201
Digi Z1201 I/O Module
Giving you a greater degree of scalability for remote I/O control and monitoring applications
Avoid the extra cost of an additional controller and effort of maintaining multiple applications. Start with a Digi Z45 Industrial Controller and add I/O by connecting Digi Z1201 expansion modules for a solution tailored to your system.
With support for various I/O combinations — relays, digital, analog, pulse, inputs and outputs — the expandable Digi Z1201 I/O module provides monitoring and controlling for use cases requiring unique I/O combinations. On-device logic is supported from anywhere by Digi’s Z45 Industrial Controllers. Our controllers perform simple to medium complexity control logic, similar to that of a Programmable Logic Controller (PLC). Unlike a PLC, our controllers are designed for remote, distributed I/O applications in a single end-to-end solution. Data communication between Z45 Industrial Controllers and Z1201 modules is provided by a 2-wire RS-485 connection with addressing and individual pin function established by program control using our Automation Control Application. Digi Z1201 is a 16-pin, multifunction I/O module consisting of 8 collector outputs, and 8 multifunction inputs, each of which can be configured under software control for analog, digital or pulse operation. The module can be daisy-chained for expansion beyond a single I/O module.Features
SPECIFICATIONS
GENERAL FEATURES - RS-485, 2-wire interface - 8 open collector outputs, 30 VDC max - 8 multi-mode inputs, 30 VDC max - Pulse counting - Analog inputs - Digital outputs INPUTS - Maximum input voltage: 30 VDC - Input logic, Low /= 4 - Sample rate: 512 Hz CONFIGURABLE I/O: DIGITAL OUTPUTS - Open collector output rating: 30 V 350 mA single output, 250 mA with all outputs on - Max update frequency: 60 Hz - Pulse width modulation: 7.8 KHz, 8-bit resolution CONFIGURABLE I/O: ANALOG INPUTS - Measurable range: 0-5 VDC - Read frequency: 20 Hz - Analog input A/D conversion: 12-bit with 10 mV CONFIGURABLE I/O: PULSE INPUTS - Max pulse width: 3 msec - Max count stored between reads: 32,767 CONTROL INTERFACE - RS-485 2-wire - Protocol: Proprietary Automation Control POWER Input: - 9-24 VDC (external source) - Consumption: 100 mA (excluding active inputs) ENVIRONMENTAL - Operating temperature: -30 °C to 70 °C (-22 °F to 158 °F) - Humidity: 90% non-condensing MOUNTING - 35 mm DIN DIMENSIONS - 10.719 x 6.02 x 3.33 cm (4.22 x 2.37 x 1.312 in), excluding terminal block and DIN clip WEIGHT - 0.29 kg (0.63 lb), without power adapter WARRANTY - 1-year standard warrantyCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi Z45 Industrial Controller
Digi Z45 Industrial Controller
XProduct SKU: CTK-Z4550A2M-P
Digi Z45 Industrial Controller with Cellular
The complete SCADA system in a box with sophisticated PLC-like automation control on the same platform that provides communications.
Includes Skycloud + Automation License
This single, rugged, compact box combines the capabilities of programmable logic controllers (PLCs) and SCADA systems into one integrated toolset that allows rapid, end-to-end deployment for all industrial monitoring and control requirements. Coupled with an on-board, web-based Automation Control Application, the Z45 brings alarms, reports and control to your web browser, mobile device, or existing SCADA infrastructure without the need for custom software development. - Integrated interfaces for analog, digital, hex and pulse information processing - Modbus client and server configurations - Built-in digital and analog input, digital output - Networks connectivity over USB, Ethernet and serial interfaces - On-board dashboard display with gauges, indicators and charts - Self-provisioning devices report to SkyCloud for complete visibility of assets - LTE coverage on all bands for North American carriers with 3G HSPA fallback - Automatic carrier provisioning and dual-SIM failover supportFeatures
Z45 Industrial Controller
Integrated interfaces for analog, digital, hex and pulse information processingCellular technology:
LTE bands: B1, B2, B3, B4, B5, B7, B8, B12, B13, B20, B25, B26, B29, B30, B41; 3G: B1, B2, B3, B4, B5, B8 Multi-carrier, auto-configuration Dual-SIM (2FF) DL MIMO/Rx diversity support (1) 50 O SMA (center pin: male)Approvals:
FCC, IC, CE, PTCRB Verizon, AT&T, T-Mobile, Sprint, US Cellular, Bell, Rogers, Telus; visit www.digi.com/resources/certifications for latest cellular certificationsPosition location:
GPS, GLONASSHost interfaces:
10/100 Ethernet RJ-45 (1) RS-232 (terminal block) (1) RS-485 (terminal block) (1) Full-speed USB (Type A) (1) High-speed micro-USB OTG Input / output:
(4) User configurable, digital/analog inputs (0-5 V / 4-20 mA) (2) Digital outputs (expandable with Z1201 I/O Module)Memory:
128 MB DDR2 RAM 256 MB SLC NAND flash (1) MicroSD Slot (externally accessible)Platform:
Linux 4.xx operating system Atmel ARM9 processor Web Manager 2.0 SkyCloud services Automation applicationPower:
9-24 VDC input, 190 mA consumption (typical - Ethernet not connected, varies with signal level)Operating temperature:
-30° to 70° C (-22° to 158° F)Dimensions:
13.92 x 11.99 x 3.68 cm (5.48 x 4.72 x 1.45 in)Warranty:
3-year standard warrantyAvailable accessories:
Multifunction I/O Controller - CTK-Z1201S Antenna - external, MIMO 2 x 4G LTE / 3G / 2G, GPS, 1 m cable, low-profile, SMA — 76002123 Antenna - pentaband, monopole 4G / 3G / 2G, GPS, swivel base SMA, hinged — 76002125 Antenna - multiband, 4G / 3G / 2G, GPS, flex/strip, SMA — 76002126 Power supply - wall; US 100-240 VAC / 50-60 Hz, 12 VDC, 1 A 0.25 in S/T — 76002127 Power supply - DIN mount; out: 40 W, 24 VDC 1.7 A; in: 85~264 VAC — 76002128 Power supply, DIN mount; out: 15 W, 24 VDC 0.6 A; in: 100-240 VAC 50/60 hz — 76002129 Mount kit - DIN rail SKU 76002130CONTACT US FOR VOLUME PRICING
2 In stock
Make an Enquiry
Digital View – 4160206XX3
£78.77 (Ex. VAT)
Digital View - 4160206XX3
XProduct SKU: 4160206XX3
Digital View inventory available from stock
From£78.77 (Ex. VAT)
6 In stock
Make an Enquiry
Digital View – 4160400103
£19.55 (Ex. VAT)
Digital View - 4160400103
XProduct SKU: 4160400103
Digital View inventory available from stock
From£19.55 (Ex. VAT)
9 In stock
Make an Enquiry
Digital View – 4161001203
£40.87 (Ex. VAT)
Digital View - 4161001203
XProduct SKU: 4161001203
Digital View inventory available from stock
From£40.87 (Ex. VAT)
7 In stock
Make an Enquiry
Digital View – 4260700103
£1.74 (Ex. VAT)
Digital View - 4260700103
XProduct SKU: 4260700103
Digital View inventory available from stock
From£1.74 (Ex. VAT)
100 In stock
Make an Enquiry
Digital View – 4260701003
£1.71 (Ex. VAT)
Digital View - 4260701003
XProduct SKU: 4260701003
Digital View inventory available from stock
From£1.71 (Ex. VAT)
64 In stock
Make an Enquiry
Digital View – 4260710003
£2.01 (Ex. VAT)
Digital View - 4260710003
XProduct SKU: 4260710003
Digital View inventory available from stock
From£2.01 (Ex. VAT)
93 In stock
Make an Enquiry
Digital View – 4264768003
£6.55 (Ex. VAT)
Digital View - 4264768003
XProduct SKU: 4264768003
Digital View inventory available from stock
From£6.55 (Ex. VAT)
59 In stock
Make an Enquiry
Digital View – 4265004003
£14.68 (Ex. VAT)
Digital View - 4265004003
XProduct SKU: 4265004003
Digital View inventory available from stock
From£14.68 (Ex. VAT)
8 In stock
Make an Enquiry
Digital View – 4274916903
£17.87 (Ex. VAT)
Digital View - 4274916903
XProduct SKU: 4274916903
Digital View inventory available from stock
From£17.87 (Ex. VAT)
10 In stock
Make an Enquiry
Digital View – 4275434003
£18.93 (Ex. VAT)
Digital View - 4275434003
XProduct SKU: 4275434003
Digital View inventory available from stock
From£18.93 (Ex. VAT)
74 In stock
Make an Enquiry
Digital View – ALR1400v2
Digital View - ALR1400v2
XProduct SKU: 4175800XX3
Compact Multi-purpose LCD Controller Connect your LCD panel: * LCD support: Up to 1440x900 panel resolution * Panel connectivity: TTL & LVDS * Video inputs: - DVI - ARGB (VGA) * RS-232 for commands & control * Auto EDID setting * Custom splash screen option * On-board temperature sensor * Customization: Contact us * Part number: 4175800xx-3.
Features
The ALR-1400v2 LCD controller is an interface board converting video signals such as DVI and ARGB(VGA) to the signals required by compatible LCD panels such as from AUO, BOE, Innolux, KOE, LG Display, Mitsubishi, NLT, Samsung, Sharp, Tianma and others. It also provides image management functions as well as monitoring and control features for the finished monitor or display system. The ALR-1400v2 is supported by a wide selection of panel connection cables and other accessories together with system documentation, 3D drawings and engineering support for customization. The ALR-1400v2 is a compact, multi-purpose controller, an enhanced version is the HE-1400v2 for harsher environment type display systems. The feature set is ideal for many industrial applications Note: The ALR-1400v2 replaces the ALR-1400 part number: 4171000xx-3Specifications
* Panel connection: LVDS (dual channel), TTL (dual channel) @60Hz * Panel resolution: Common panel resolutions & timings from 640x480 up to 1440x900 selected by dip switch. * Colors: Up to 8 bit per color * Panel power: Supports 3.3V, 5V, 12V, 18V LCD panels * Backlight inverter/driver support: PWM, or D/A DPMS Enable pin (5V or 3.3V) * Input: Analog RGB (x1) 60Hz VESA standard inputs VGA to SXGA * Widescreen modes: 1280/1360, 1366/1368 * CVT modes - coming soon * Digital separate sync & Digital Separate Sync. Auto detects * Input: DVI-D (x1) 60Hz VESA standard inputs VGA to SXGA * Widescreen modes: 1280/1360, 1366/1368 * CVT modes - coming soon * Function Interface On Screen Display (OSD) menu * Functions can be called by buttons or IR remote control. * Functions are also accessible via a Serial port (RS-232). * Functions Basic: Brightness, Contrast, Sharpness, Clock, Phase, Color temperature, Image position, Gamma. Additional: Auto Image Adjust, Color Auto Adjust, Auto source seek, OSD timeout, OSD menu position, OSD menu transparency, Input select source, Aspect ratio * Firmware update: Over DVI * Controller power: +12VDC / 24 VDC +/- 5%, 2.5W (controller only) * Status indicators on board: Dual color or LED * Plug & Play: DDC 1.2/b compatible * Size 107.4mm x 94.4mm x 17.1mm(max) * Reliability MTBF greater than 100,000 hours @ 25oC (calculated using Telcordia SR-332 procedure)CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digital View – ALT-1920 controller board
Digital View - ALT-1920 controller board
XProduct SKU: 4176400XX3
The ALT-1920 LCD controller is an equivalent alternative to the ALR-1920. It combines three of the most popular input formats, HDMI, Analog RGB (VGA) and DisplayPort in a compact general purpose solution for LCD panels up to 1920x1200 resolution. One of the key features of this compact highly reliable controller is the low signal latency from input signal to panel output signal. In addition the controller now uses ceramic capacitors to further improve reliability.
Features
Output: *Panel connection:LVDS (2 channel) * Panel resolutions:Up to 1920x1200, includes all standard resolutions as well as custom resolutions * Colors:Up to 8-bit per color * Panel power:3.3V, 5V, 12V, 18V * Backlight inverter/driver support: PWM, DPMS Enable pin (5V or 3.3V) * Audio Line out, stereo, no amplification. * Supports Digital View audio add-on board with OSD volume control. Input: * HDMI 1.3 (x1) 60Hz up to 1920x1200 480p, 576p, 720p, 1080i, 1080p * Displayport 1.2a (x1) 60Hz up to 1920x1200 * VGA (x1) 60Hz up to 1920x1200 With auto detect of Digital Separate Sync, Sync-On-Green & Composite Sync. Function Interface: * On Screen Display (OSD) menu Functions can be called by buttons or IR remote control. Functions are also accessible via a Serial port (RS-232) Functions Black level, Contrast, Sharpness, Clock, Phase, Color temperature, Image position, Gamma, Auto picture setup, Auto RGB calibration, Auto source seek, OSD timeout, OSD position, OSD menu rotation, OSD transparency, Select input source, Volume control, Load factory defaults *Status indicators on board: Dual color LED *Plug & Play: DDC 1.2/b compatible. * Latency: ~13ms measured on HDMI with 1920x1080 panelSpecifications
Controller power: +12V/+24VDC ±5% Controller power consumption: ~2.5w (controller logic only, no panel or backlight driver) Standby power consumption: 1.3W~1.5W MTBF in excess of 200,000 hours @ 25oC (calculated using Telcordia SR-332 procedure) Warranty 3 yearsCONTACT US FOR VOLUME PRICING
6 In stock
Make an Enquiry
Digital View – DT-1920-HDMI TFT controller board
Digital View - DT-1920-HDMI TFT controller board
XProduct SKU: 4177000XX3
The Digital View DT-1920 LCD controller board with single HDMI input and LVDS panel connection support for general commercial and industrial applications. Compact and highly reliable this controller board incorporates advanced features such as Digital View’s multi panel timing support, brightness & temperature sensors, auto-EDID setting and audio line-out. The scalar incorporates a line buffer and provides low latency input to panel. The power circuitry uses ceramic capacitors for extended lifetime across all operating temperatures.
Features
• LCD panel resolution up to 1920x1200, 8-Bit, LVDS • Input signal: HDMI 1.3, up to 1920x1080, 1080p • Compact 91.4mm x 62.7mm x 11mm • Multi-Panel support, dip switch select • Auto edid, panel matched • Light sensor support, 2 pin • Temperature sensors support, onboard & 3 pin • Audio line outSpecifications
Dimensions: 62.7mm x 91.4mm x 11mm Power: +12VDC ±5%, 2.5W (controller only) Calculated Mean Time Between Failures In excess of 200,000 hours. Warranty: 3 yearsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digital View – EPM-050 E-Ink Interface board
Digital View - EPM-050 E-Ink Interface board
XProduct SKU: 4160245XX3
The Digital View EPM-050 interface board is designed for E Ink 13.3" monochrome reflective e-paper display panels. This low power interface accepts an image transferred over USB from a source media player such as a Raspberry Pi or Android PC. E Ink based displays are ideal for public signboards, transport information displays and similar. The significant benefits include the high visibility in bright environments as well as the ability to operate from solar power due to the very low power consumption.
Features
• Inputs: Micro USB • Panel support: E Ink 13.3" • Power: 5VDC or 12VDC (select)Specifications
Panel Connectivity Panel connection: E Ink 13.3" (ED133UT3 models) Resolution For 13.3": 1600 x 1200 Functions Image rotation: 180 degrees Image mirror (horizontal flip) Built-in temperature sensor 16 level grey scale mode Input Micro USB (for image input)CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digital View – EPM-050C E-Ink Interface Board
Digital View - EPM-050C E-Ink Interface Board
XProduct SKU: 4160256XX3
The Digital View EPM-050C interface board is designed for E Ink 13.3" color reflective e-paper display panels such as ED133UJ1. This low power interface accepts an image transferred over USB from a source media player such as a Raspberry Pi or Android PC. E Ink based displays are ideal for public signboards, transport information displays and similar. The significant benefits include the high visibility in bright environments as well as the ability to operate from solar power due to the very low power consumption.
Features
The display system design is broadly similar to working with LCD panels except that the driver board, EPM-050C has a USB interface for the transfer of bitmap images from a media source. Also, partial screen writes are possible enabling faster image updates and further reductions in power consumption.Specifications
Resolution: For 13.3": 1600 x 1200 Functions: Image rotation: 180 degrees Image mirror (horizontal flip) Built-in temperature sensor 16 level grey scale mode Input: Micro USB (for image input) Power: Power input 5VDC default, 12VDC selectable (jumper) Power output (option): 5V DC for (for 12V input only) Raspberry Pi Standby power consumption (as meaasured): 13.3" Panel + EPM-050 + = 0.5W During image write to panel (as measured): 13.3" Panel + EPM-050 + x 12VDC = 1.5W Image file: Supports bitmap (bmp) file format Operating temperature: -15°C to +65°C (based on chamber temperature tests) Reliability: MTBF in excess of 200,000 hours @ 25oC (calculated using Telcordia SR-332 procedure)CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digital View – EPM-100 E-Ink Interface boards
Digital View - EPM-100 E-Ink Interface boards
XProduct SKU: 5460239XX3
The Digital View EPM-100 interface board is designed for E Ink 32" and 42" bi-stable reflective display panels. This low power interface accepts an image transferred over USB from a source media player such as a Raspberry Pi or Android PC. E Ink based displays are ideal for public signage, the significant benefits include the high visibility in bright environments as well as the ability to operate from solar power due to the very low power consumption.
Features
Panel Connectivity Panel connection: E Ink 32" (ED312TT2) and 42" (ED420TT1) models Resolution For 32": 1440 x 2560 For 42": 2160 x 2880 Functions Image rotation: 0/90/180/270 degrees Image mirror Image flip Built-in temperature sensor 16/32 level grey scale mode Input Micro USB (for image transfer) Power Power input 12V DC Power output (option): 5V DC for Raspberry PiSpecifications
Operating temperature 0°C to +50°C Reliability MTBF in excess of 200,000 hours @ 25oC (calculated using Telcordia SR-332 procedure) Warranty 3 yearsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry