All Products
Showing 1387–1404 of 1800 results
Skyworks/IsoLink - OLS400 Optocoupler
XProduct SKU: OLS400
- Electrical parameters guaranteed over –55 °C to +125 °C ambient temperature range - 1500 VDC electrical isolation - Low input current: 0.5 mA - Low output VSAT: 0.1 V typical - High current transfer ratio (CTR): 1000% typical - Low power consumption - Similar to industry standard parts: 6N138/6N139 in plastic and 6N140 in hermetic dual inline packages (DIPs) - Offers 100% high reliability screenings The OLS400 has a high CTR at low input currents, making it ideal for applications such as Metal Oxide Semiconductors (MOS), Complementary MOSs (CMOS), and low-power logic interfacing or RS-232C data transmission systems. Each OLS400 has an LED and integrated photodiode Darlington detector I/C, mounted and coupled in a custom hermetic surface-mount Leadless Chip Carrier (LCC) package that provides 1500 VDC electrical isolation between the input and output. The Darlington detector has an integrated base-to-emitter resistor for superior high-temperature performance. The split Darlington design permits lower output saturation voltage and higher switching speed operation than is possible with conventional photo-Darlington designs. Device mounting is achieved with reflow soldering or conductive epoxies. The pads are gold plated and RoHS compliant.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Solsta - Ethernet Transformers
XProduct SKU: H1102FNLT
The Trusted Components Supplier for LAN Applications
Our LAN discrete magnetic transformers and integrated connector modules (ICMs) are designed and manufactured to comply with IEEE802.3 and ANSI X3.263 standards. Pulse Electronics Networking BU also offers a competitive range of RoHS compliant products for local area network devices.Features
APPLICATION-LAN: ETHERNET TRANSFORMER/CHOKE CONSTRUCTION: OPEN FRAME NUMBER OF PORTS: SINGLE PACKAGE: SMT PACKAGE HEIGHT MM: 5.994 PACKAGE LENGTH MM: 12.700 PACKAGE WIDTH MM: 9.652 POE RATING: NON-POE ROHS COMPLIANT: YES-RoHS-6 SPEED: 100BASE-TX TEMPERATURE: 0 TO 70CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Enquire for availability
Make an EnquiryEnquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry9 In stock
Make an Enquiry
Solsta - Mesh Network IoT Dev Kit
XProduct SKU: DS-IOT-01
Mesh Network Development Kit / Set for IoT This development set enables you to build your complete IoT solution from sensors and actuators through a gateway - up to different clouds and mobile apps in a matter of hours. You will be able to extend your network with ready IQRF interoperable devices and use your solution for proof-of-concept projects. This set provides a wireless network based on IQRF mesh technology. It includes: > Sensors for temperature, light intensity, voltage measurement > Relay kit > IQRF programmer & debugger > Transceivers > IQRF coordinator adapter for the UP board > Connectors and cables > Software UP Board and power adapter; UP board: 2GB RAM, 32GB eMMC- when fitted with the IQRF coordinator from the Development Set, provides a gateway to cloud services. Preinstalled software: No. Products Included in this Kit/Set: DCTR-72DAT (IQRF transceiver) CK-USB-04A (IQRF programmer, debugger and TR host with USB connectivity) DK-EVAL-04A (Universal portable development kit for TR transceivers, TR host) DDC-SE-01 (IQRF evaluation and development kit with sensors) DDC-RE-01 (IQRF evaluation and development kit with relays) KON-RASP-01 (Adapter to connect IQRF transceiver to Raspberry Pi or alternatives) CAB-USBABMICRO (Micro USB cable 18.5 cm) USB flash drive (Software and documentation - including Custom DPA handlers and IQRF IDE with specialized macros)
From£250.00 (Ex. VAT)
2 In stock
Make an Enquiry
Solsta - PH08xx Series SMT Planar Switch Mode Transformers
XProduct SKU: PH0801CNL-P
Pulse's latest series of low-loss, flat coil surface mount planar transformers deliver high efficiency power to applications with tight height constraints. The PH08xx Planar-Transformer series are pin compatible with Pulse’s legacy PA08xx series, but with much lower direct current resistance (DCR). Using a copper fill factor that is twice that of a PCB wound transformer means that the DCR of the primary winding is reduced by 50% and the power rating is increased by 20%.Replacing the traditional multilayer PCB winding with a flat coil winding also reduces the price by approximately 20%. Planar magnetics have been primarily implemented as a high power (>100W) low profile (< 12.5mm) solution for medium to low voltage conversions, such as the intermediate bus converter in a distributed power architecture. They are available in tape-and-reel packaging.
Features
- Gen 2 Planar: Flat Coil Winding - Platforms: 2 sizes, 23x22mm to 29x27mm - Height: < 11.9mm profile - 20% price reduction compared to PCB - 50% lower DCR Power Rating - up to 300W - SMD, 1500Vdc Isolation - Custom design capability up to 1KW/4KV - RoHS compliant & meet standard EIA481 requirementsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Solsta - Pulse
XProduct SKU: PE-53112NL
-Designed for use with National’s device numbers LM2574/LM2575/LM2576 -Base material meets flammability requirements of UL 94V-0 -Performance verified by National Semiconductor
From£0.91 (Ex. VAT)
870 In stock
Make an Enquiry
Solsta - Pulse Electronics ISM Chip Antennas
XProduct SKU: W3013
Features:
• Frequency 866-870 MHz • Gain 1.5dBi • Size 10 x 3.2 x 4 mm • PCB Keep out 10.8 x 8.25mm • Polarization Linear • Radiation pattern Omni • ISM 868MHz BanCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry22485 In stock
Make an EnquiryEnquire for availability
Make an Enquiry199 In stock
Make an EnquiryEnquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry40 In stock
Make an EnquiryEnquire for availability
Make an Enquiry
Solsta - TR-75 Vertical Mounting Module
XProduct SKU: TR-75DA
TR-75D RF Transceiver Module 868MHz and 916 MHz license free ISM (Industry, Scientific and Medical) frequency band Its highly integrated ready-to-use design containing MCU, RF circuitry, serial EEPROM and on-board antenna requires no external components. Vertical mounting and very small dimensions allow space saving. Extended RF power results in higher RF range. Extra low power consumption fits for battery powered applications. MCU with built-in operating system significantly reduces application development time. Optional DPA framework supports applications, even without programming. Key features include; > Operating System (upgradeable at the user) > DPA framework for Data controlled approach > GFSK modulation > Selectable RF band 868/916 MHz, multiple channel > RF output power 10 mW > MCU with extended resources, user interrupt capability > Extra low power consumption, power management modes > SPI interface supported by OS in background > Serial EEPROM 256 Kb > PWM output > Programmable HW timer > Battery monitoring > 12 pins (9 I/O pins, 1 input only pin) > A/D converter (3 channels) > Analog comparator > Vertical mounting, SIM card compatible > Shielding Can > Small Dimensions Applications where this item is best fit include; > Bidirectional RF communication > Point-to-point or network wireless connectivity > Telemetry, AMR (automatic meter reading) > WSN (wireless sensor network) > Building automation > Street lighting control > Wireless monitoring, control and regulation > Remote data acquisition > RF connectivity in many other fields > Also for municipal and indoor areas > Internet of Things
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry