Silicon Labs
Showing 1–18 of 25 results
2 In stock
Make an EnquiryEnquire for availability
Make an EnquiryEnquire for availability
Make an EnquiryEnquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry
Silicon Labs - BGM11x Blue Gecko Bluetooth Smart Module
XProduct SKU: BGM111A256V2R-P
Overview coming soon - Call 01527 830800 for information
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Silicon Labs - BGM121 / BGM123 Blue Gecko Bluetooth SIP Module
XProduct SKU: SLWSTK6101C
The World’s Smallest Bluetooth SiP Module Silicon Labs’ BGM121 Blue Gecko SiP Bluetooth Module has +8 dBm TX power and is targeted for applications where ultra-small size, reliable high performance RF, low-power consumption and easy application development are key requirements. At 6.5 x 6.5 x 1.4 mm, the BGM121 module fits applications where size is a constraint. BGM121 also integrates a high performance, ultra robust antenna, which requires minimal PCB, plastic and metal clearance. The total PCB area required by BGM121 is only 51 mm². The BGM121 also integrates a Bluetooth 4.2 compliant Bluetooth stack and it can also run end-user applications on-board or alternatively used as a network co-processor over one of the host interfaces.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Silicon Labs - BGM220 WirelessGecko Bluetooth® Module Explorer Kit
XProduct SKU: BGM220-EK4314A
BGM220-EK4314A
The BGM220 Explorer Kit is an ultra-low cost, small form factor development and evaluation platform for the BGM220P WirelessGecko Bluetooth® Module
The BGM220 Explorer Kit is focused on rapid prototyping and concept creation of IoTapplications. It is designed around the BGM220P Module, based on the EFR32BG22 System-on-Chip, which is an ideal device family for developing energy-friendly connected IoT applications.The kit features a USB interface, an on-board SEGGER J-Link debugger, one user-LEDand button, and support for hardware add-on boards via a mikroBus socket and a Qwiicconnector. The hardware add-on support allows developers to create and prototype applications using a virtually endless combination of off-the-shelf boards from mikroE,sparkfun, AdaFruit, and Seeed Studios.Features
Small Form Factor Kit
- EXP compatible breakoutsTarget device
- BGM220PC22HNA - Secure Bluetooth 5.2 module - 76.8 MHz, ARM Cortex-M33 with 512 kB of flash and 32 kB RAM - Bluetooth 5.2 Radio with supported for direction finding and LE coded PHY - 38.4 MHz HFXO crystal - 32.768 kHz LFXO crystal - 2.4 GHz matching network and a chip antennaOn-board Board controller
- J-Link debugger - SWD physical layer - Packet trace over UART/async protocol - Virtual COM with hardware flow controlUSB Micro-B connector for debug connection
User interface features
- 1x button (with EM2 wake-up) - 1x LEDMini Simplicity Debug Connector (SLSDA001A compatible) with access to
- AEM - PTI - VCOM - SWDThird-party add-on connectors
- mikroBus socket - Qwiic connectorCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry1 In stock
Make an Enquiry
Silicon Labs - C8051F34A-GQ
XProduct SKU: C8051F34A-GQ
Silicon Labs inventory available from stock
From£10.90 (Ex. VAT)
31 In stock
Make an EnquiryEnquire for availability
Make an Enquiry
Silicon Labs - EFR32xG24
XProduct SKU: XG24-DK2601B
The EFR32xG24 Dev Kit is a compact, feature-packed development platform. It provides the fastest path to develop and prototype wireless IoT products. The development platform supports up to +10 dBm output power and includes support for the 20-bit ADC as well as other key features. With the the xG24’s AI/ML hardware accelerator, this is the ideal development board for AI/ML development including platforms from TinyML, Edge Impulse, SensiML and MicroAI.
Features
- Based on EFR32MG24B310F1536IM48 2.4 GHz Wireless SoC - +10 dBm, 1536 kB Flash, 256 kB RAM, 6x6 QFN48 - SecureVault High - AI/ML Hardware Accelerator - Packet Trace Interface - Virtual COM port - J-Link on-board debugger supporting SWD - External device debugging - USB connectivity - User LED and pushbuttons - Si7021 RHT Sensor - Intertial Sensor - Stereo microphones - Pressure Sensor - Ambient light sensor - Hall-effect sensor - CR2032 coin cell battery supportCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryEnquire for availability
Make an EnquirySilicon Labs - ETRX357-P1148
XProduct SKU: ETRX357-P1148
Silicon Labs inventory available from stock
From£12.17 (Ex. VAT)
10 In stock
Make an Enquiry
Silicon Labs - MGM11x Mighty Gecko Smart Module for zigbee® and Thread
XProduct SKU: MGM111A256V1-P
Silicon Labs’ Mighty Gecko MGM111 module integrates its EFR32MG1 Mighty Gecko SoC into a small form factor module for zigbee and Thread mesh networks. Modules enable the fastest time to market and are ideal for lower volume (< 100 K) applications. The fully certified module integrates all components (Crystals, RF passives and Antenna) required for a system-level implementation of zigbee and Thread mesh networks. At +10 dBm this module meets the WW regulatory requirements for IEEE 802.15.4 2.4 GHz used in both zigbee and Thread networks.
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryEnquire for availability
Make an EnquirySilicon Labs - PG23-PK2504A
XProduct SKU: PG23-PK2504A
Silicon Labs inventory available from stock
From£54.09 (Ex. VAT)
4 In stock
Make an Enquiry
Silicon Labs - SLTB010A Thunderboard BG22 Bluetooth 5 IoT Development Kit
XProduct SKU: SLTB010A
Silicon Labs SLTB010A Thunderboard BG22 is a small form-factor, optimized development platform for adding Bluetooth connectivity to battery-powered IoT products.
Features
Thunderboard BG22 Features
Small Form Factor Thunderboard
- EXP compatible breakouts
Target device
- EFR32BG22
- Secure Bluetooth 5.2 SoCs for high-volume products
- 76.8 MHz, ARM Cortex-M33 with 512 kB of flash and 32 kB RAM
- Bluetooth 5.2 Radio with supported for direction finding and LE coded PHY
- 38.4 MHz HFXO crystal
- 32.768 kHz LFXO crystal
- 2.4 GHz matching network and chip antenna
On-board Board controller
- J-Link debugger
- SWD physical layer
- Packet trace over UART/async protocol
- Virtual COM with hardware flow control
USB Micro-B connector for debug connection
User interface features:
- 1x button (with EM2 wake-up)
- 1x LED
Data storage / OTA support
- 8 Mbit SPI flash
Power save features
- Controllable and separate power domain(s) for sensors
Mobile app for Android and iOS
- View sensor data, control LEDs and detect button pushes
- iOS app implemented in swift
- Android app implemented in native code
- Source code available at GitHub
Sensors
- Relative humidity & temperature sensor: Si7021
- UV and ambient light sensor: Si1133
- Hall effect sensor: Si7210
- 6-axis IMU: Invensense ICM-20648
Mini Simplicity Debug Connector (SLSDA001A compatible) with access to:
- AEM
- PTI
- VCOM
- SWD
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry