Digi International
128 Results
Digi EX50 5G Cellular Router
Digi EX50 5G Cellular Router
XProduct SKU: EX50-WXS6-GLB
Digi EX50 - Global, 5G NR Sub-6 GHz with 4G/3G fallback, Wi-Fi 6 2x2 MIMO DBS, dual 2.5 GbE, RS-232, with accessories
Business has forever changed with millions of employees working remotely. The Digi EX50 5G cellular router with 5G/4G dual connectivity provides your business with a fast, secure and resilient enterprise-grade network that changes the work-from-anywhere experience for good. Digi EX50 is an ideal choice for your business as you adapt to the new normal. The small form factor of Digi EX50 makes it the 5G go-to enterprise solution where the work is happening: at the headquarters for backup connectivity, at the branch for cost-optimized primary connectivity, or at the IT-managed home office for secure, all-in-one connectivity with Wi-Fi. Part of Digi enterprise solutions, this router comes with industry-leading software, including Digi Accelerated Linux (DAL OS), Digi TrustFence® security framework, and the Digi Remote Manager® configuration and management platform. These tools deliver security, reliability and system-wide management of your entire infrastructure. Dual-SIM slots provide carrier flexibility and wireless failover, and with 4G LTE and 3G fallback, you're covered in areas where 5G is not yet deployed. The latest generation Wi-Fi 6 radios in the Digi EX50 router operate simultaneously for higher speed, capacity, quality of service and range than previous Wi-Fi products. Dual 2.5 Gigabit Ethernet ports break the Gigabit barrier and deliver 5G speeds for future-ready networks. Digi EX50 supports indoor use-cases with an extended operating temperature range, such as smart factories, warehouses, construction sites or infrastructure sheds. An available serial port with Cisco straight-through pinout enables secure out-of-band (OOB) management of other on-site equipment. To simplify installation, Digi EX50 can be directly powered by an active PoE+ switch or a DC IN barrel connector as the primary or backup power source for redundancy.Features
5G go-to enterprise solution for primary or backup wireless connectivity
- Future-proof and ready for new use cases such as 5G network slicing, SD-WAN, 4K/8K cameras and AR/VR - High-speed 5G NR and 4G LTE-Advanced Pro Cat 20 dual connectivity cellular radio - Enterprise-grade Wi-Fi 6 and dual 2.5 Gigabit Ethernet - Extended operating temperature range for wider use-cases - Standards-based Power over Ethernet simplifies installation - Multiple mounting options and accessories - Serial port for remote, out-of-band management - Securely deploy, monitor and control devices with Digi Remote Manager® - Full-featured enterprise and industrial cellular routing platformCONTACT US FOR VOLUME PRICING
4 In stock
Make an Enquiry
Digi Grove Board
From£22.69(Ex. VAT)
Enquire for availability
Make an Enquiry
Digi IX10 & IX20 Industrial IP Enclosure
Digi IX10 & IX20 Industrial IP Enclosure
XProduct SKU: 205-120-P
Integrated 2x multi-band LTE omni antenna + WiFi omni antenna + place to install DIGI IX10 or IX20 router
QuMax dual omni LTE antenna (2x SMA connector) for DIGI routers is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It also has embedded Wi-Fi dualband 2.4 & 5 GHz omni antenna (RP-SMA connector). If you use DIGI router with QuMax antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure.CONTACT US FOR VOLUME PRICING
1 In stock
Make an Enquiry
Digi IX10 4G LTE Cellular Router
Digi IX10 4G LTE Cellular Router
XProduct SKU: IX10-00G4
Digi IX10 - LTE Cat 4 Global, Cellular Router with 1 x Ethernet, and RS-232/485
Rugged, reliable, cost-effective connectivity for critical industrial applications Digi IX10 is a full-featured cellular router built for trouble-free reliability over a long service life. Its flexible power and connectivity options make it a versatile and cost-effective choice for light industrial, digital signage, ATMs, lottery terminals, kiosks and other unattended retail applications that need to provide secure transactions. Digi IX10 is a full-featured cellular router built for troublefree reliability over a long service life. Its flexible power and connectivity options make it a versatile and costeffective choice for industrial, digital signage, ATMs, lottery terminals, kiosks and other unattended retail applications that need to provide secure transactions. Digi IX10 features an RJ-45 serial port supporting both RS-232 and RS-485, as well as dual SIMs for redundant connection. It can operate independently on LTE networks, with features to assist in network control and management, such as VLAN support, load balancing between cellular and Ethernet WANs, dual APNs and configurable APN search. Digi IX10 also offers low-touch and no-touch provisioning.Features
FEATURES AND BENEFITS – Compact and economical cellular routing platform with industrial feature set. – Redundant connectivity with dual SIMs and Digi SureLink®. – Global bands and single part number to simplify global distribution, deployment and management. – Built-in Digi TrustFence® for device security, device identity and data privacy. – Digi Remote Manager platform for easy setup, mass configuration and out-of-band management. – Ethernet port and single RJ-45 serial port RS-232/485CONTACT US FOR VOLUME PRICING
65 In stock
Make an Enquiry
Digi IX14 4G LTE Router
Digi IX14 4G LTE Router
XProduct SKU: IX14-L301-P
Cloud-managed networking for the Industrial IoT
Digi® IX14 is a rugged, secure and reliable LTE industrial router powered by an enhanced operating system that supports any utility or industrial application. Digi IX14 is ideal for connecting process automation controllers, telco infrastructure controllers, sensing equipment and remote data loggers. Digi IX14 includes a one-year subscription to Digi Remote Manager® — a web-based device management platform that helps operators reduce costly downtime and service calls, and can increase revenue by bringing distributed sites online faster. An intuitive user experience makes installation smooth and easy. Digi management solutions provide quick setup, configuration and maintenance of large installations of remote Digi routers and gateways, as well as third-party devices. Leading edge scripting and custom business logic using Open Source Python 3.6 facilitates custom edge computing. Because many IoT devices are subject to attack, Digi TrustFence® security is built in to protect your investments far into the field.Features
- LTE Cat 1 with dual SIM for carrier failover and flexibility - Single Ethernet and single serial (RS-232) port - Flexible 9-30 VDC power input - MIL-STD-810G certified for shock, vibration, temperature - IP54 rated for dust and water resistance - Includes one-year subscription to Digi Remote Manager® to deploy, monitor, manage and maintain a suite of routers - TrustFence® security: authenticated boot, dedicated security co-processor, encrypted data storage, unique default passwords and certificate managementCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi IX15 XBEE Gateway and Cellular Router
Digi IX15 XBEE Gateway and Cellular Router
XProduct SKU: IX15-00G4-XB2
Digi IX15 Gateway and Cellular Router
The versatile Digi IX15 functions as both XBee® gateway and cellular router for customers seeking lower-cost, quicker-to-market alternatives to chip-down DIY designs for networking operations. The industrial-grade Digi IX15 helps build Digi XBee® or other cellular networks - with Python programming for edge computing - for connectivity to cloud applications or data centers. With C1D2 certification and rugged enclosure, Digi IX15 is ideal for the harsh, corrosive environments found in oil and gas, water/wastewater, solar, agriculture and other industrial applications. For developers needing a highly secure, common platform to cut costs and time-to-market, Digi IX15 reduces risk and drives project efficiencies. Digi recommends Digi Remote Manager® to manage the IX15 and connected devices. Digi Remote Manager® is a web-based device management platform that allows easy setup, mass configuration and maintenance for thousands of remote devices.Features
- 2.4GHz Digi XBeeR 3 (Zigbee / DigiMesh / 802.15.4) - Cellular (Global LTE Cat-4, 3G, 2G) - Edge compute programmability ¡V Python 3 - Dual SIMs and Digi SureLinkR - Bluetooth (hardware ¡V 5.0, software ¡V 4.2) - 1 x Ethernet (10/100) - 1 x Serial Port RS-232/485 (RJ45 10-pin) - Operating Temperature -40¢XC to +74¢XC - Digi TrustFenceR security framework - Flat surface mounting or optional DIN rail clip - Class 1 Division 2 (C1D2) certifiedCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi IX20 Industrial Cellular Router
Digi IX20 Industrial Cellular Router
XProduct SKU: IX20-WAG4-P
Digi IX20 Industrial Cellular Router
The Digi IX20 is a cloud managed cellular router that provides primary and backup WWAN connectivity over software selectable multi-carrier LTE. It offers advanced security features, dual SIM redundancy and management capabilities that make it suitable for PCI or NERC-CIP compliant applications. It is a versatile and purpose-built for industrial infrastructure, digital signage, retail kiosks, service terminals and other critical assets with a need for secure transactions. The Digi IX20 can be managed with Digi Remote Manager® - a web-based device management platform that allows easy setup, mass configuration and maintenance for thousands of remote devices.Features
- Compact and economical cellular routing platform with industrial feature set - Redundant connectivity with dual SIMs and Digi SureLink® - Global bands and single part number to simplify global distribution, deployment and management - Built-in Digi TrustFence® for device security, device identity and data privacy - Digi Remote Manager® software for easy setup, mass configuration and management - Dual Ethernet ports and single serial (RS-232) portSpecifications
CERTIFICATIONS - Visit https://www.digi.com/resources/certifications for latest certifications LTE (G4) WITH DIGI CORE® PLUG-IN LTE MODEM 1002-CMG4 LTE Cat 4: B1, B2, B3, B4, B5, B7, B8, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41 3G: B1, B2, B4, B5, B6, B8, B19 2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz CONNECTORS (2) 50 O SMA (center pin: female) SIM SLOTS (2) Mini-SIM (2FF) SIM SECURITY Secured in cellular module WI-FI MODULE 1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz) AUTHENTICATION TACACS+, Enterprise RADIUS MODES Client mode and access point mode simultaneously CLIENTS Maximum 10 clients (access point mode: regardless of combination of clients and access points) ACCESS POINTS Maximum 2 access points (access point mode: regardless of combination of clients and access points) SECURITY WPA/WPA-2 personal, WPA/WPA-2 enterprise CONNECTORS (1) 50 O SMA (center pin: male) SOFTWARE AND MANAGEMENT REMOTE MANAGEMENT Digi Remote Manager; SNMP v2/v3 (user installed/managed) LOCAL MANAGEMENT WebUI (HTTP/HTTPS); CLI (Telnet, SSH) MANAGEMENT / TROUBLESHOOTING TOOLS FTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with Syslog and SMTP client; NTP/SNTP; Nagios, Intelliflow, IPerf, DynamicDNS, Ping, Traceroute MEMORY 256 MB RAM, 256 MB flash ETHERNET PORTS (2) RJ-45; 10/100 Mbps (auto-sensing) SERIAL PORTS (1) DB9M; RS-232 DTE; Signal support TXD, RXD, CTS, DTR, DCD, flow control software (XON/OFF), hardware supported (CTS/RTS) PHYSICAL DIMENSIONS (L x W x H) 107 mm x 162 mm x 35 mm (4.21 in x 6.38 in x 1.38 in) WEIGHT 0.65 kg (1.4 lb) STATUS LEDs Power, Internet, Wi-Fi, SIM 1, SIM 2, signal strength (5), LTE ENCLOSURE Glass-filled polyphenylene sulphide (PPS) / IP30 POWER REQUIREMENTS POWER INPUT 9 - 30 VDC, 1.0 A maximum POWER CONSUMPTION 2.5 W typical (idle); 6 W typical (peak Tx/Rx) ENVIRONMENTAL OPERATING TEMPERATURE Models with Wi-Fi: -20° C to 70° C (-4° F to 158° F); device performance may be impacted above 50° C (122° F) Models without Wi-Fi: -40° C to 70° C (-40° F to 158° F); device performance may be impacted above 50° C (122° F) RELATIVE HUMIDITY 5% to 95% (non-condensing) APPROVALS CELLULAR Visit https://www.digi.com/resources/certifications for latest cellular certifications SAFETY IEC62368-1, CB, EN62311 ENVIRONMENTAL ROHS3 MISSIONS / IMMUNITY FCC Part 15, Subpart B, Class A; CE, RCM; CAN ICES-3(B)/NMB-3(B) PRODUCT WARRANTY 3-yearsCONTACT US FOR VOLUME PRICING
11 In stock
Make an Enquiry
Digi IX20 Industrial Cellular Router
Enquire for availability
Make an Enquiry
Digi IX30 Accessory Kit
Digi IX30 Accessory Kit
XProduct SKU: 76002113-P
Digi IX30 Accessory Kit
- Power supply - Antennas - Cat 6 Ethernet cable - GPS antennaCONTACT US FOR VOLUME PRICING
5 In stock
Make an Enquiry
Digi IX30 Industrial Cellular Router
Digi IX30 Industrial Cellular Router
XProduct SKU: IX30-00G4
Digi IX30 - LTE Cat 4 Global, 3G/2G fallback, dual Ethernet, RS-232/422/485, GNSS
Intelligent 4G router designed for critical infrastructure and industrial applications Digi IX30 is an intelligent 4G LTE router designed for optimal performance and reliability across a wide range of critical infrastructure and industrial applications. This complete solution is fully integrated with software and security, providing a secure, reliable connection to industrial controllers, process automation equipment and smart grid assets on third party sites or remote locations. Software-defined, multi-carrier networking and global LTE and HSPA+ options make it easy to get connected. This drop-in connectivity gives operators a way to reduce downtime and service calls, and also increase revenue by bringing distributed sites online faster. The Digi IX30 router offers FirstNet Capable™ models designed to meet the demands of first responders for critical communications. Additional industrial use case applications include building and process automation controllers, IP cameras and access controllers, remote data loggers, flow meters, sensing equipment, telco infrastructure, and traffic and obstruction lighting. Gain critical insights into your deployed devices and manage your network with Digi Remote Manager (Digi RM) — the command center for your deployment. Digi RM is a cloud-based solution that facilitates easy setup, mass configuration, maintenance and visibility into the health of your network, whether you deploy dozens or thousands of devices. In the event of an interruption to your primary network connection, Digi RM also provides secure terminal access for out-of-band management of edge devices via serial port and command-line interface.Features
Cellular connectivity: LTE Cat 4 Global - LTE Cat 4 - FDD: B1, B2, B3, B4, B5, B7, B12, B13, B18, B19, B20, B25, B26, B28; TDD: B38, B39, B40, B41; - WCDMA: B1, B2, B4, B5, B6, B8, B19; - GSM: B2, B3, B5, B8; - GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS - Connectors: (3) 50 O SMA (2x cellular, 1x GNSS); center pin: female - SIM slots: (2) Mini-SIM (2FF) - SIM security: Secured in cellular module - GNSS: Protocol NMEA 0183 V3.0; Acquisition Time Hot Start 1 s; Warm Start 29 s; Cold Start 32 s; Accuracy Horizontal: < 2 m (50%), < 5 m (90%); - Altitude: < 4 m (50%), < 8 m (90%); Velocity: < 0.2 m/s Software and management: - Remote management: Digi Remote Manager®, SNMP v1/v2c/v3 (user installed/managed), SMS - Local management: Web UI (HTTP/HTTPS); CLI (Telnet, SSH, Serial) - Management / troubleshooting tools: FTP, SFTP, SCP; protocol analyzer with PCAP for Wireshark; event logging with Syslog and SMTP; NTP/SNTP Ethernet: - Ports: (2) RJ-45; 10/100 Mbps (auto-sensing) Serial: - (1) DB-9 DTE - RS-232/422/285 - Signal support: TXD, RXD, CTS, DTR, DCD, DSR, RI - Flow control: software (XON/OFF), hardware supported I/O: - Connector: 12-pin screw down terminal block - Digital: 0-30 VDC, 200 mA max.; (4) I/O, software-selectable; pulse counter input - Analog: (4) analog I/O; 4-20 mA or 0-10 V, software-selectable; 12-bit resolution USB: - Ports: (1) USB 2.0 Type A; 5 V 500 mA max Physical: - Dimensions (L x W x H): 12.8 cm x 10 cm x 5.2 cm (5.04 in x 3.94 in x 2.05 in) - Weight: 0.5 kg (1.1 lb) - Status LEDs: Signal Strength (5), LTE, Power - Enclosure/Rating: Aluminum / IP30 - Mounting: DIN rail mount Power requirements: - Power input: 9 – 30 VDC, 18 W min power source required - Power connector: Screw down removable terminal block - Power consumption: W typical (idle); 12 W typical (peak Tx/Rx) - Environmental: - Hazardous (Class 1 Div 2): Yes - Operating temperature: -34° C to 74° C (-29° F to 165° F); reduced cellular performance may occur above 60° C (140° F) - Storage temperature: -40° C to 85° C (-40° F to 185° F) - Ethernet isolation: 1.5 kV RMS - Serial port protection (ESD): 15 kV - Relative humidity: 5% to 95% (non-condensing) Approvals: - Cellular (IX30-00G4): CE, RED, UKCA; visit www.digi.com/resources/certifications for latest cellular certifications - Safety: Hazardous locations: ANSI/ISA-12.12.01-2015, CAN/CSA C22.2 NO.213-15; Ordinary locations: UL 62368-1, 2nd Edition, 2014-10-14; UL 62368: 2014, 2nd Edition; ATEX standards: Protection method II 3 G Ex nA IIC T4 Gc; EN 60079-0:2012+A11:2013, EN 60079-15:2010, DEMKO 15 ATEX 1574X Rev. 1 - IECEX standards: US/UL/ExTR17.0077/00 - Emissions / Immunity: CE, RED, FCC Part 15 Subpart B, ICES-003, AS/NZS CISPR 322 - Environmental: RoHS3 Product warranty: 3-year* Available accessories: Accessories not included; view available accessories - IX30 Accessory Kit - PSU, antennas, Cat 6 Ethernet cable, GPS antenna: 76002113 (recommended) - Power supply (required, choose industrial extended temperature or commercial) - Power supply - 18 VDC, 1 A, wall mount level VI, industrial temperature, changeable plug tips, 2-pin combicon screw terminal plug: 76002104 - Power supply - 18 VDC, 1 A, wall mount level VI, commercial temperature, changeable plug tips, 2-pin combicon screw terminal plug: 76002117 - Antenna - 5G/LTE 600 MHz - 6 GHz, swivel, black: 76002114 (recommended / optional) - Antenna base - SMA, 1 m, RG174: 76000954 (recommended / optional) - Cable - UTP, Cat 6, 2 m (6 ft), black, flat patch cable: 76002106 (recommended / optional)CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi IX40 5G Edge Computing Industrial IoT Solution
Digi IX40 5G Edge Computing Industrial IoT Solution
XProduct SKU: IX40-05
5G edge computing industrial IoT cellular router solution, purpose-built for Industry 4.0
-Digi IX40 is a 5G edge computing industrial IoT router solution, integrated with Digi Remote Manager (Digi RM) to empower rapid processing, analysis, and integration of industrial asset data.
Purpose-built for Industry 4.0, Digi IX40 supports the 5G connectivity and edge intelligence needed to enable numerous use cases ranging from predictive maintenance and asset monitoring to machine learning and advanced robotics. It seamlessly connects multiple machines, whether wired or wireless, in the most demanding environments, optimizing integration of cloud-delivered operational technology (OT) services with information technology (IT) to streamline complex operations and scale IT infrastructure. With its all-in-one design, strong computing power and integrated memory, Digi IX40 offers substantial capabilities for real-time data processing, edge computing and advanced precision while reducing complexity and total cost of ownership. Digi Containers facilitate potent and cost-effective applications, providing additional flexibility and scalability for Industry 4.0, energy, smart cities and other uses. The Digi IX40 solution offers FirstNet Capable™ models designed to meet the demands of critical applications where reliability is essential for industrial use cases and emergency response. Additional use cases for Digi IX40 include manufacturing process automation, precision monitoring and control, industrial automation, utilities and traffic management. Gain critical insights and manage your network with Digi RM — the cloud-based command center for your deployment. Digi RM also provides secure terminal access for out-of-band management of edge devices via serial port and command-line interface.Features
5G edge computing industrial IoT cellular router solution, purpose-built for Industry 4.0
- Global 5G and LTE support and certification on major carrier networks around the world - Digi Containers to enable powerful, cost-efficient applications - Integrated edge computing capabilities for hosting containerized applications and custom solutions - Ethernet, SFP, serial, I/O and Modbus bridging - Extremely resilient cellular connection through Digi’s patented SureLink®, VRRP+ protocol and dual SIM slots - GNSS receiver supporting GPS, GLONASS, BeiDou and Galileo - License-free enterprise software: VPN, firewall, logging and authentication - Digi Remote Manager® platform for easy setup, mass configuration and management - Rugged enclosure with options for DIN rail or shelf mounting - Digi WAN Bonding for 5G/LTE WAN aggregation and immediate failoverCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi IX40 5G Industrial Starter Kit
Digi IX40 5G Industrial Starter Kit
XProduct SKU: 76002147
Digi IX40 5G Industrial Starter Kit
The starter kit includes: 30 W power supply 4 wideband cellular antennas Power supply specifications: Compatibility: Digi IX10, Digi IX20, Digi IX40 Contains: Power supply with plug tips for US, UK, EU, AU Rated input voltage range: 100 - 240 V Input frequency: 50 - 60 Hz Rated input current: 0.6 A Max. in-rush current: 40 A at 230 VAC Input plug type: Removable plug tips for US, UK, EU, AU Max. load current: 1.66 A Min. load current: 0 A Output power: 30 W Operating temperature: -20 °C to 70 °C (-4 °F to 158 °F) Storage temperature: -40 °C to 70 °C (-40 °F to 158 °F) Size (L x H x W): PSU (excluding lead): 71.2 mm x 43.2 mm x 31 mm excluding removable plug tips; 115 mm x 75 mm x 65 mm in packaging box (with plug tips) Weight: In packaging with plug tips: 300 g (0.66 lb) Cord length: 1.83 m +/-50 mm (6 ft +/-2 in) Certifications: UL/CSA, CE, GS, UKCA, SAA, ROHS, REACH Antenna specifications: Frequency range: 600 to 6000 MHz Input impedance: 50 O VSWR: = 3.0 Gain: = 5 dBi Polarization type: Linear Antenna size: 221 mm x 26.95 mm x 13.5 mm (8.7 in x 1.06 in x 0.53 in) Casing: ABS Connector type: SMA male (center pin) Operating temperature: -20 °C to 80 °C (-4 °F to 176 °F) Radome color: Black IP rating: IP55CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi LCD Panel
From£411.79(Ex. VAT)
Digi LCD Panel
XProduct SKU: CC-ACC-LCDW-10-P
LCD Application Kit, including 10" WXGA (1280x800) LCD panel with PCAP touch for ConnectCore 6, 8X, 8M Nano 7" LCD Accessory Kit for ConnectCore 6UL, TFT, 16:9, WVGA (800 x 480), projective capacitive touch
From£411.79(Ex. VAT)
Enquire for availability
Make an Enquiry
Digi LR54 Rugged Cellular Router
Digi LR54 Rugged Cellular Router
XProduct SKU: LR54-AW401
Digi TransPort LR54 is a high-speed LTE Advanced networking platform designed for retail, commercial and managed networking applications across distributed enterprises. Each device features an LTE Advanced CAT6 modem with speeds up to 300 Mbps and support for global deployments with a single hardware version, as well as a 4-port Gigabit Ethernet switch and serial port for console access. The routers include licensefree enterprise software features like VPN, firewall and SNMP. The two FIPS models make use of an embedded FIPS 1402 validated cryptographic module for all encryption and authentication functions. The LR54 FIPS model is often used as a VPN gateway to bridge local private subnets through public or untrusted networks, ensuring message privacy and integrity. The Wi-Fi variant features dual-band, dual-concurrent 5 GHz and 2.4 GHz radios, personal/enterprise security, and multiple SSIDs for maximum range and throughput performance in M2M applications. Digi TransPort LR54 is ideal for connecting: - Retail branch sites - Self-service kiosks - Remote offices/equipment HIGH-SPEED LTE NETWORKING PLATFORM CREDIT CARD PROCESSOR
CONTACT US FOR VOLUME PRICING
1 In stock
Make an Enquiry
Digi LTE Industrial Starter Kit
Digi LTE Industrial Starter Kit
XProduct SKU: 76002148
Digi LTE Industrial Starter Kit
Suitable for Digi IX10, Digi IX20, Digi IX40
The starter kit includes: 30 W power supply 2 wideband cellular antennasPower supply specifications:
Compatibility: Digi IX10, Digi IX20, Digi IX40 Contains: Power supply with plug tips for US, UK, EU, AU Rated input voltage range: 100 - 240 V Input frequency: 50 - 60 Hz Rated input current: 0.6 A Max. in-rush current: 40 A at 230 VAC Input plug type: Removable plug tips for US, UK, EU, AU Max. load current: 1.66 A Min. load current: 0 A Output power: 30 W Operating temperature: -20 °C to 70 °C (-4 °F to 158 °F) Storage temperature: -40 °C to 70 °C (-40 °F to 158 °F) Size (L x H x W): PSU (excluding lead): 71.2 mm x 43.2 mm x 31 mm excluding removable plug tips; 115 mm x 75 mm x 65 mm in packaging box (with plug tips) Weight: In packaging with plug tips: 300 g (0.66 lb) Cord length: 1.83 m +/-50 mm (6 ft +/-2 in) Certifications: UL/CSA, CE, GS, UKCA, SAA, ROHS, REACHAntenna specifications:
Frequency range: 600 to 6000 MHz Input impedance: 50 O VSWR: = 3.0 Gain: = 5 dBi Polarization type: Linear Antenna size: 221 mm x 26.95 mm x 13.5 mm (8.7 in x 1.06 in x 0.53 in) Casing: ABS Connector type: SMA male (center pin) Operating temperature: -20 °C to 80 °C (-4 °F to 176 °F) Radome color: Black IP rating: IP55CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi Neo PCI Express
Digi Neo PCI Express
XProduct SKU: 77000889-P
Digi Neo
Flexible serial cards deliver reliable, cost-effective and high performance serial port expansion in one of the smallest form factors available. Digi Neo multiport serial cards are designed for reliable serial port expansion in tight workspaces and specialized server/PC environments. They are ideal for point-of-sale, industrial automation, factory control, kiosks and data collection applications. Leveraging an Application Specific Integrated Circuit (ASIC), Digi Neo delivers up to 921.6 Kbps of throughput. This PCIe compatible card offers on-board surge suppression on each signal, protecting system operation from electrical interference. Additional features include large buffers for data transfer, low latency and baud rate customization.Features
BENEFITS – 4 or 8 RS-232 serial ports – Low Profile and Standard Profile supported – PCI Express slot support – Flexible cabling and connector options – Surge suppression on all signals protects against electrical interference with system operation – Low latency for reliable performance – Windows® and Linux® driver support – Throughput up to 921.6 KbpsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Digi Netsilicon NET+ARM
From£14.35(Ex. VAT)
Digi Netsilicon NET+ARM
XProduct SKU: NS9215B-0-I150-P
NS9210/NS9215 32-bit NET+ARM Processor Family
Cost-efficient, small footprint ARM926EJ-S processor with integrated encryption and unique interface flexibility. The NS9210/NS9215 processor family offers a cost-efficient, small-footprint 32-bit ARM9 solution that combines high performance, integrated Ethernet networking, strong security, and unique interface flexibility. It is the ideal choice for a broad range of applications such as security/access control, medical, industrial/building automation, transportation and remote monitoring. Two independent Flexible Interface Modules (FIMs) with 300 MHz DRPIC1655X processor cores provide a growing list of application-specific peripheral interface options. The NISTcompliant 256-bit hardware AES accelerator combines stateof-the-art data privacy services with superior performance, and Digi’s patented dynamic power management addresses the needs of today’s power budget-conscious designs. The complete and easy-to-use development kits for NET+OS® are based on the field-proven ThreadX® Real-Time Operating System and deliver a true and IPv6-ready turnkey embeddeddevelopment solution with the Eclipse-based Digi ESPIDE.Features
- High-performance 150 MHz ARM926EJ-S core - 10/100 Mbit Ethernet MAC integration - On-chip hardware AES accelerator - Software-configurable I/O flexibility through FIMs - Power management modes with dynamic clock scaling - Rich set of integrated peripheral interfaces - Complete and royalty-free NET+OS development platform for network-enabled embedded devices - Upgrade path to ARM9 core performance for existing NS7520 designs through pin-compatible NS9210From£14.35(Ex. VAT)
112 In stock
Make an Enquiry
Digi Networking – ASB-EX15-WC18-GLB
3 In stock
Make an Enquiry