Astrodesign
Showing all 11 results
Astrodesign – CT-1860 HDMI cable tester
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - CT-1860 HDMI cable tester
XProduct SKU: CT-1860
By connecting HDMI cable in a loop, CT-1860 checks the transmission characteristics at the physical layer easily. By using HDMI Response Module, pass / fail judgment is done by comparing with the master cable or by the standard value set by the user. This product is useful for the development and production line testing of HDMI cables. The frequency characteristics are displayed on the front screen of the CT-1860, and PC application can be used as well.
Features
CT-1860 Cable Tester in General: ·Supports various cable measurements by replacing the performance module. (new module plan: latency measurement, eye-diagram monitor, and frequency response measurement of USB-C, DisplayPort and LAN.) ·Operation by using front buttons and LCD. Graphical display of frequency characteristics. Save measurement results. ·Operation by PC application (SP-1860) by LAN. ·Display measuring result of S parameter (S21) of 4-terminal network. PM-1860-H1 HDMI Response Module (specifically) ·Evaluation of transmission characteristics for each TMDS line.(AOC, Metal) ·Output amplitude can be changed by user. ·Broad bandwidth measurement of 100MHz-15GHz. (HDMI2.1 FRL 48Gbps can be tested.) ·Wiring check and voltage display of control lines (DDC/HPD/CEC). ·Measurement of voltage and current consumption value of +5V line. ·CABLE ID check of AOC. ·Optional Calibration Cable (CA-1860-HDMI)Specifications
Power Requirements: AC 100V-240V 50/60Hz Power Consumption: 47W MAX Dimensions: 210(W)×88(H)×235(D)mm (Excluding Protrusions) Weight: Approx. 2.6kg External Control: LAN & TRIGGER Operating Temperature Range: +5 to 40? Operating Humidity Range: 20 to 80%RH (No Condensation)CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – SD-7075A HDMI2.0 to HDMI2.1 converter
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - SD-7075A HDMI2.0 to HDMI2.1 converter
XProduct SKU: SD-7075A
SD-7075-A is an HDMI converter box to convert 4 channels of HDMI 2.0 to 1 channel of HDMI 2.1. It is useful for connecting to an HDMI 2.1 TV from a set top box or graphic board that has 4 channels of HDMI 2.0 output.
Features
* Converts HDMI 2.0 TMDS (4ch) to HDMI 2.1 FRL (1ch) * Supports DSC (Display Stream Compression) 1.2 * Supports HDCP 1.4 and 2.3 * EDID, SCDC and Link Training status are displayed on the front panel * LAN, RS-232C and GPIO (customized base) for external control Note : 1 : Frame rate and bit depth of output video are same as input video. In case of 8K/50p, 59.94p and 60p output, it becomes YCBCR 4:2:0 automatically. 2 : FRL output rate is determined according to the EDID of the HDMI Sink. If there is no EDID in the HDMI Sink, maximum FRL rate will be output. 3 : All 4 input channels should be connected to the Source.Specifications
General Specifications HDMI: Dot Clock 25MHz to 2376MHz Color Format: RGB, YCBCR 4:4:4/4:2:2/4:2:0 Color Depth: 8, 10, 12-bit Audio Sampling Frequency: 32kHz to 192kHz (L-PCM 2 to 8ch) IEC60958, 61937 HDCP: Ver. 1.4/2.3 E-EDID: Ver. 1.4 (DDC2B) External Supplying Power : 5V /Max. 50mA Power Requirements: AC 100 - 240V Power Consumption: 100W MAX Dimensions: 330(W)x44(H)x250(D)mm (excluding protrusions) Weight: Approx. 2 kgCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – SD-7076 12G-SDI to HDMI2.1 converter
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - SD-7076 12G-SDI to HDMI2.1 converter
XProduct SKU: SD-7076
Converts 12G-SDl x 4ch to HDMI 2.1 FRL (8K/60p, 4K/120p, etc.)
Features
* Supports DSC (Display Stream Compression) 1.2 * Supports HDCP 1.4 and 2.3 * Simple signal generation function (Color Bar, audio 1kHz - 18dB) * 12G-SDI loop through connection * Monitoring function to check error of SDI input and payload ID * EDID, SCDC and Link Training status are displayed on the front panel * LAN, RS-232C and GPIO (customized base) for external controlSpecifications
General Specifications Power Requirements: DC 12V Power Consumption: 100W MAX Dimensions: 210(W)×44(H)×350(D)mm(excluding protrusions) Weight: Approx. 2 kgCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VA-1842 HDMI2.0 Video analyser
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VA-1842 HDMI2.0 Video analyser
XProduct SKU: VA1842
HDMI2.0 6G and HDCP2.2 Protocol Analyser · Suitable for testing HDMI 2.0 6G and HDCP 2.2 supported Source devices · (Pixel Clock: Max.600MHz, 4K/60p RGB 4:4:4 and 4:2:0)
Features
· Supports HDMI CTS MOI and HDCP test item as an option (Test items will be updated accordingly.) · VA-1842 analyzes video timing, audio timing, InfoFrame/Packet, HDCP status, DDC line monitoring, CEC line monitoring, and video data (including BT-2020 colorimetry) measurement. · Similar functions as previous generation HDMI analyzers *VA-1831/VA-1838. · *Lipsync measurment function (NEW) · *Oen frame capture function (NEW) · SCDC (Status and Control Data Channel) register display and line monitoring function · EIA CEA-861-F* and partial DMT r1 v12 timing input · *Except VIC91, 92 (2560 x 1080). Fixed timings input (timing table) · EE-EDID1.4 and CEA-861-F of HDMI 2.0 are pre-installed. · "Through Mode" supported with optional adaptor · *3G Through Box : VA-1841-1 · *6G Through Box : IA-1563 · *By placing VA-1842 between Source and Sink device, it can monitor communication of DDC/CEC · lines and save log data. Source signal is passed through to sink and video data is not regenerated. · EDID Editor and Log Viewer function supported with standard application software · Portable sizeSpecifications
Specifications: HDMI Input Pixel Clock 25 to 600MHz (Data Rate : max.6Gbps) Color Space RGB/YCbCr 4:4:4, 4:2:0 *When receiving YCbCr4:2:2 signal, the bit depth is displayed as "8-bit" which is a value in GCP Packet. Colorimetry SMPTE 170M / ITU601, ITU709, EXT Colorimetry (BT.2020, xvYCC601, xvYCC709, sYCC601, Adobe YCC601, Adobe RGB) Bit Width Max.16-bit HDCP Ver.1.4 and 2.2 Repeater Mode Will be supported in future update Generate Mode Supported Through Mode Supported with Optional Adaptor Notice : No guarantee on its signal quality if over 3G (300MHz) Audio Input Sampling frequency Maximum 192KHz 8 channel EIA *EIA-861-F (max.4K/30 or60p) fixed timing input *Note : Except VIC91, 92 (2560x1080). *Note :Detailed timing table available at request. E-EDID Ver.1.4 and CEA-861-F of HDMI 2.0 MOI HDMI 2.0 MOI, HF-3-3 Repeater Repeated Input Port - 6 - 2160p LCD Display 12.1 inch, *XGA (1024x768) with 16 million color *Note : 4Kx2K Dot-by-Dot display by scaling also supportedCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VA-1845 HDMI2.0B source tester
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VA-1845 HDMI2.0B source tester
XProduct SKU: VA1845
The VA-1845 is an HDMI 2.0b (6G and HDCP 2.2) supported source tester which enables test automation for the production line and quality control. Since it supports both analysis and signal generator functions, it is also suitable for testing HDMI cables, switchers, repeaters like AVRs.
Features
HDMI Input / Output Specifications Transfer Rate:TMDS 25 to 594MHz(150MHz at 12bit) Deep Color: 8, 10, 12, 16bits (8bit at timings over 300MHz) Color Space : RGB / YCbCr 444, 422, *420 *420 timings can be measured, but cannot be used for video level testing HDCP: Ver.1.4 and 2.2 I2S / SPDIF 8ch :32KHz to 192KHz (L-PCM 2 to 8 channels) Compressed Audio: Header (Pa to Pd) decode supported DDC: Ver.1.4(DDC 2B) compliant E-EDID: Supported (CEA EDID Timing Extension : CEA-861-F) USB / Control Interface USB Memory: Host (for USB flash drive), Device (for control via PC) LAN: 10/100BASE-T RS-232C: Connect to computer and control is carried out via terminal commands.Specifications
General: Operating Temperature:+5 to 40 degrees Storage Temperature :10 to 60 degrees Storage Humidity : 0 to 80%RH with no condensation Power Supply: AC100 to 240V Power Consumption: 50W Dimensions: 44(W) x 320(H) x 260 (D) mm Net Weight: approximately 2.0 kgCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VA-1847 HDMI2.1 8K video protocol analyser
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VA-1847 HDMI2.1 8K video protocol analyser
XProduct SKU: VA1847
VA1847 enables analysis of HDMI2.1 video, audio, protocol and video timings in real time
Features
* Supports signal analysis and generation of FRL (Fixed Rate Link) with 4 lanes of up to 12Gbps signals and TMDS with 3 lanes of up to 6 Gbps signals. [CTA-861-G VIC (Video Identification Code)] * Supports maximum of 4K/120p YCBCR 4:2:2 and 8K/60p YCBCR 4:2:0 timings. (10K timings are not supported. * Video, Audio, InfoFrame, HDCP (1.4, and 2.3), and SCDC analysis functions * Supports repeater function. HDMI protocol analysis of HDMI output devices is possible * Supports through fuction. DDC/CEC line analysis is possible without reciving video signal using a dedicated through cable.(Option) * Logging InfoFrame (like Dynamic Range) at each individual frame with time stamps * eARC receive/generate function,ARC receive fuction * EDID emulation and DDC/CEC monitoring function * New 12-inch touch panel LCD display (external mouse control also supported) * HDMI 2.1 CTS function * Three test modes for testing source, sync and repeater devicesCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VA-1849HDMI2.1 8K video source tester
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VA-1849HDMI2.1 8K video source tester
XProduct SKU: VA1849
VA-1849 is a source tester that supports HDMI 2.1 signal FRL (up to 12 Gbps/4 lanes) and TMDS. It supports the measurement and analysis of the source DUT by setting the control and each test item with commands via PC. It enables automated inspection on the production line and in the QC department.
Features
* Sink function: Video/audio timing, InfoFrame measurement, HDCP 1.4/2.3 authentication, and EDID/SCDC communication analysis. It supports up to 8K/60p YCBCR 4:2:0 and 4K/120p YCBCR 4:4:4 video signals in uncompressed mode. It supports up to 8K/60p YCBCR 4:4:4 video signals in compression (DSC) mode. It supports eARC output. * Testing function: By comparing the internal pattern with the input pattern, it is capable of measuring the protocol details such as bit drop and color defects, as well as automatic inspection for FRL link training (comparison inspection is supported up to 4K/60p). It is possible to confirm whether the packet data of the input signal matches the expected value. It is possible to confirm whether the input audio signal is within the allowable value. * Source function: Compatible with CTA-861-G and VESA Display Monitor Timing (DMT) compliant video signal output. Each parameter of the InfoFrame can be set. It supports eARC/ARC input. * External control: Supports sending and receiving commands such as measurement results and parameter settings via LAN, USB-TypeB and RS-232C. Original control software can be developed by the combination of commands. * Saving results and logs: Analysis data and test logs can be saved in a USB flash drive. [Pass/Fail Judgment of Comparative Test] Internal video patterns are created from the color palette, and inspection is performed by comparing them with the input video patterns. Error pixel values and colors with (X,Y) coordinates are displayed and the difference between A and B is analyzed. The color palette is 16 colors, and up to 3 lines of color information patterns can be registered for comparison.Specifications
HDMI I/O Video: Dot Clock TMDS 25MHz~2376MHz?FRL 3G3L/6G3L/6G4L/8G4L/10G4L/12G4L Color Format RGB, YCBCR 4:4:4/4:2:2/4:2:0* *YCBCR4:2:0 does not support comparison checking of video data. Color Depth 8, 10, 12 bit Audio Sampling Frequency 32kHz~192kHz (L-PCM 2~8ch) Format IEC 60958?61937 Data Resolution 16, 20, 24bit EDID Ver.1.4 (DDC2B) HDCP Ver.1.4/2.3 eARC Input, output (Only ch2) ARC Input Number of Ports 2 inputs, 1 output*. *In case of two inputs at the same time, select one of the two. Unable to use input/output feature simultaneously with one unit. External Control: USB: Type A Used to connect a USB flash drive. (not included.) Type B Connect to computer and control is carried out via terminal commands LAN : Connect to computer and control is carried out via terminal commands RS-232C: Connect to computer and control is carried out via terminal commandsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VA1844A handheld HDMI2.0 video analyser
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VA1844A handheld HDMI2.0 video analyser
XProduct SKU: VA1844A
The VA-1844A is a portable HDMI 2.0b (6G and HDCP 2.2) supported protocol analyzer with a 7-inch touch screen powered by battery or AC power.
Features
Features ·Small size: 269 (W) x 182 (H) x 41 (D) mm (10.6 in x 7.2 in x 1.6 in) ·Lightweight: Approx. 1.25 kg (2.76 lbs) ·Protocol analysis of 4K/60p 4:4:4 (Max pixel clock 600MHz) able to analyze and display image ·Capable of HDMI 2.0b signal generation Supports : Receiver Mode (sink emulation) Generate Mode ( source emulation) Through Mode (cable emulation) with further options for repeater device and emulation testingSpecifications
HDMI Input / Output Specifications * Transfer Rate:TMDS 25 to 594MHz(150MHz at 12bit) * Deep Color:8, 10, 12, 16 bits (8bit at over 300MHz timings) * Color Space :RGB / YCbCr 444, 422, 420 *When receiving YCbCr4:2:2 signal, the bit depth is displayed as "8-bit" which is a value in GCP Packet. * HDCP:Ver.1.4 and 2.2 * I2S / SPDIF 8ch : 32KHz to 192KHz (L-PCM 2 to 8 channels) * Compressed Audio: Header (Pa to Pd) decode supported * DDC: Ver.1.4(DDC 2B) * E-EDID: Supported (CEA EDID Timing Extension : CEA-861-F)CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VG-879 video signal generator
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VG-879 video signal generator
XProduct SKU: VG879
Programmable Digital Video Generator with options to support : * HDMI2.1 * 12G-SDI * DisplayPort 1.2a * V-by-One HS as well as older digital and analogue video outputs
Features
* 8K/60p YCbCr 4:2:0(12-bit), 4K/120p YCbCr 4:4:4(12-bit) transmission by HDMI 2.1 * 4K/60p is transmitted by one channel of 12G-SDI. * Max.4 slot-type interface units can be selected from HDMI 2.1, 12G-SDI, HDMI2.0b 3G or 6G, DisplayPort 1.2a, V-by-One and Analog. * By synchronizing 4 or 2 units of VG-879, 8K/120p or 8K/60p signals are supported by V-by-One® HS. * HDMI 2.1 test functions supported CTA-861-G Timing Format including 8K/60p YCbCr 4:2:0 and 4K/120p YCbCr 4:4:4 eARC/ARC status check SCDC, FRL link status check ITU-R BT.2020 color bar and video output setting HDR Test Patterns supported HDCP 1.4/2.3 certification test * HDMI 2.1 Compliance Test (MOI) * High bit Rate Audio Generation (VT-8500-0006) * Optional 8K Evaluation Image(VT-7010).CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VG-886 12G-SDI video signal generator
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VG-886 12G-SDI video signal generator
XProduct SKU: VG886
12G SDI video signal generator supports: Timing Formats · 12G-SDI Quad-Link 8K 60/59.94p YCbCr 4:2:2 10 bits (SMPTE 2082-12) · 12G-SDI Dual-Link 8K 30/29.97p YCbCr 4:2:2 10 bits (SMPTE 2082-11) * · 12G-SDI Single-Link 4K 60/59.94p YCbCr 4:2:2 10 bits (SMPTE 2082-10) · 6G-SDI Single-Link 4K 30/29.97p YCbCr 4:2:2 10 bits (SMPTE 2081-10) (* 12G-SDI Dual Link output is treated as reference)
Features
· 12G-SDI signal 8K 60/59.94p YCbCr 4:2:2 10 bits · 12G-SDI signal 4K 60/59.94p YCbCr 4:2:2 10 bits · Supports ITU-R BT.2020 · Audio 32ch can be embedded · Payload ID can be embedded · Time code can be embedded · HDR supported. · Reference input support (Internal synchronization / external synchronization selectable) · Supports external control (LAN / RS-232C) Pattern · Color bar (100% / 75%) · Raster (White / Gray) · Check field (Pathological) · Ramp · Crosshatch · Multiburst · BlackSpecifications
Specifications VIDEO Number of output terminals 4ch HD-SDI SMPTE 274M, 3G-SDI SMPTE 425-5, 425-1 6G-SDI SMPTE 2081-10 12G-SDI SMPTE 2082-12, 2082-10 Gradation 10bit Colorimetry Rec.ITU-R BT.2020R/Rec.ITU-R BT-709 AUDIO Number of channels 32ch Sampling frequency 48kHz Resolution 24bits Audio level -18dBFs / -20dBFs Audio frequency 1kHz PAYLOAD standard SMPTE ST2082 / ST425-1(Byte2) reference Insertion code Normal insertion TIMECODE standard SMPTE 12M-2, 12M-3 Time code VITC TIMECODE LTC TIMECODE HFRTC TIMECODE REFERENCE Interface 75 O BNC input 1 line / 2 lines output reference Internal synchronization / external synchronization Sync output 525 NTSC BB signal, 625 PAL BB signal, 1125 HDTV Tri-level synchronization signal (1125/60i , 1125/59.94i )CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Astrodesign – VG-887 HDMI2.1 video signal generator
From£0.00 exc. VAT(Ex. VAT)
Astrodesign - VG-887 HDMI2.1 video signal generator
XProduct SKU: VG887
VG-887 is a portable and easy to operate solution to HDMI 2.1 signal generation. It features the key function of HDMI 2.1 compatibility and is a more cost-effective solution compared to the top-end model VG-879.
Features
* Signal generation by FRL (Max. 12Gbps/4-lane) and TMDS modes. DSC 1.2 is supported * Uncompressed 8K/60p YCBCR 4:2:0 (12-bit), 4K/120p YCBCR 4:4:4 (12-bit) transmission * FRL Link Training, SCDC and EDID status check * HDCP 2.3 and 1.4 test * Pre-installed test patterns and user’s own image data can be output * PC control by LAN or RS-232CSpecifications
HDMI Specifications Interface HDMI×1ch Video Dot Clock Max. 1360MHz Data Rate Max. 48Gbps (FRL), 18Gbps (TMDS) Video Timing CTA-861-G Video Format RGB, YCBCR 4:4:4, 4:2:2, 4:2:0 Color Depth 8, 10, 12-bit HDCP Ver. 2.3 (FRL timing supports Ver. 2.3 only), Ver. 1.4 Audio L-PCM 8ch General Specifications Power Requirements AC100-240V Power Consumption 60W MAX Operating Temperature Range 0 to 40? Operating humidity range 20 to 80% RH (No Condensation) Dimensions 210 (W)×44(H)×300 (D) mm (Excluding Protrusions) Weight Approx. 2 kgCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry