General Description
The 2(12) decoders are a series of CMOS LSIs for remote control system applications. They are paired with Holtek s 212 series of encoders (refer to the encoder/decoder cross reference table). For proper operation, a pair of encoder/decoder with the same number of addresses and data format should be chosen.
The decoders receive serial addresses and data from a programmed 212 series of encoders that are transmitted by a carrier using an RF or an IR transmission medium. They compare the serial input data three times continuously with their local addresses. If no error or unmatched codes are found, the input data codes are decoded and then transferred to the output pins. The VT pin also goes high to indicate a valid transmission.
The 2(12) series of decoders are capable of decoding informations that consist of N bits of address and 12 N bits of data. Of this series, the HT12D is arranged to provide 8 address bits and 4 data bits, and HT12F is used to decode 12 bits of address information.
Applications
Burglar alarm system
Smoke and fire alarm system
Garage door controllers
Car door controllers
Car alarm system
Security system
Cordless telephones
Other remote control systems
Features
Operating voltage: 2.4V~12V
Low power and high noise immunity CMOS technology
Low standby current
Capable of decoding 12 bits of information
Binary address setting
Received codes are checked 3 times
Address/Data number combination
HT12D: 8 address bits and 4 data bits
HT12F: 12 address bits only
Built-in oscillator needs only 5% resistor
Valid transmission indicator
Easy interface with an RF or an infrared transmission medium
Minimal external components
Pair with Holtek s 212 series of encoders
18-pin DIP, 20-pin SOP package
