Sensing & Control
Showing all 13 results
AMPHENOL_AN6N4-GC11KA143L/37C_NTC_MEDICAL_SENSOR
Enquire for availability
Make an Enquiry
Ezurio – Temperature Probe
£38.00 (Ex. VAT)
13 In stock
Make an Enquiry
Holtek HT9170B / HT9170D DTMF Receiver
Holtek HT9170B / HT9170D DTMF Receiver
XProduct SKU: HT9170D-18SLF-P
Holtek HT9170B / HT9170D DTMF Receiver
The HT9170B/D are Dual Tone Multi Frequency (DTMF) receivers integrated with digital decoder and bandsplit filter functions as well as power-down mode and inhibit mode operations. Such devices use digital counting techniques to detect and decode all the 16 DTMF tone pairs into a 4-bit code output. Highly accurate switched capacitor filters are implemented to divide tone signals into low and high group signals. A built-in dial tone rejection circuit is provided to eliminate the need for pre-filtering.Features
- Operating voltage: 2.5V~5.5V - Minimal external components - No external filter is required - Low standby current (on power down mode) - Excellent performance - Tristate data output for MCU interface - 3.58MHz crystal or ceramic resonator - 1633Hz can be inhibited by the INH pin - HT9170B: 18-pin DIP package HT9170D: 18-pin SOP packageCONTACT US FOR VOLUME PRICING
6220 In stock
Make an Enquiry
Holtek HT9200A / HT9200B DTMF Generators
From £0.50 (Ex. VAT)
Holtek HT9200A / HT9200B DTMF Generators
XProduct SKU: HT9200A-8SLF-P
Holtek HT9200A/HT9200B DTMF Generators
General Description The HT9200A/B tone generators are designed for MCU interfaces. They can be instructed by a MCU to generate 16 dual tones and 8 single tones from the DTMF pin. The HT9200A provides a serial mode whereas the HT9200B contains a selectable serial/parallel mode interface for various applications such as security systems, home automation, remote control through telephone lines, communication systems, etc.Features
Features · Operating voltage: 2.5V~5.5V · Serial mode for the HT9200A · Serial/parallel mode for the HT9200B · Low standby current · Low total harmonic distortion · 3.58MHz crystal or ceramic resonator · HT9200A: 8-pin SOP package - HT9200B: 14-pin SOP packageFrom£0.50 (Ex. VAT)
8000 In stock
Make an Enquiry
PNI Corporation – AHRS_IMU
From £39.99 (Ex. VAT)
PNI Corporation - AHRS_IMU
XProduct SKU: NAV14703-P
Attitude Heading Reference Systems (AHRS) and Inertial Measurement Unit (IMU)
complete sensor-based guidance modules that require no external calibration and no additional algorithms, Headway is an Attitude Heading Reference Systems (AHRS) that require in-field, time-consuming recalibration, the Headway targeting module constantly delivers heading data in static and dynamic situations, with 1º of accuracy. And because it contains the latest IMU Sensors and PNI´s RM3100 magnetic sensor integrated with sensor fusion Edge AI algorithms, Headway needs no manual calibration. NaviGuider is a complete sensor-based orientation system for UAVs, ocean gliders, robots, and buoys. The module incorporates an RM3100 magnetic sensor, an accelerometer and a gyroscope, all tightly fused on a super low- power Edge-AI sensor coprocessor, freeing up your host processor for other work.From£39.99 (Ex. VAT)
2 In stock
Make an Enquiry
PNI Corporation – Digital Magnetic Compass
PNI Corporation - Digital Magnetic Compass
XProduct SKU: PRIMEPRO14668-P
Digital Magnetic Compass
New Digital Magnetic Compass, half the size and twice as robust as the standard Prime DMC. Delivering field-accurate heading, pitch, and roll data, even where GPS is compromised or unavailable – with 1º of accuracy. These devices Combines PNI’s high sensitivity Magneto-Inductive heading sensor with the latest high stability 3-axis MEMS accelerometer for superior heading accuracy. At less than half the size of other digital compasses, Prime Pro, TargetPoint3, TargetPoint-SX and SeaTRAX-85 deliver accurate Heading data with Low power requirements. Ideal for laser range finders, ADCPs, buoys, drilling, oceanography systems and towed arrays.CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
PNI Corporation – RM3100 Magnetic Sensor
From £5.00 (Ex. VAT)
PNI Corporation - RM3100 Magnetic Sensor
XProduct SKU: RM3100-90053-P
Magneto-Inductive Magnetometer
Incredible resolution with low power, low mass, small size and large dynamic range. Getting accurate navigation and position data depends on having accurate magnetic field measurement to begin with. Unlike traditional Hall-effect sensors, the RM3100 magneto-inductive sensor has over 23 times better resolution and 33 times less noise resulting in far more precise data outputs. The RM3100 can detect fields as low as 2.7 nT at 1Hz, with a noise floor of 4 pT /vHz at 1Hz. It also has a linear response over a range of 100,000 nT. The RM3100 has been tested for various environmental conditions, such as thermal shock, mechanical shock, radiation, and thermal cycles, and has shown strong performance and stability. The Sensor suite is available on a Breakout Board (RM3100-14190EVK)From£5.00 (Ex. VAT)
105 In stock
Make an Enquiry
PNI Corporation – RM3100-CB Magnetometer Board
£46.00 (Ex. VAT)
PNI Corporation - RM3100-CB Magnetometer Board
XProduct SKU: RM3100-CB14754
RM3100-CB Compact Board-Mounted Magnetometer
All the benefits of the RM3100 on a tiny, easy-to handle board for quick and simple installation. The RM3100-CB can detect fields as low as 2.7 nT at 1Hz, with a noise floor of 4 pT /vHz at 1Hz. It also has a linear response over a range of 100,000 nT. It’s been tested for various environmental conditions, such as thermal shock, mechanical shock, radiation, and thermal cycles, and has shown strong performance and stability. Stable and reliable over time and temperature and extremely radiation tolerant, the RM3100-CB has I2C and SPI interfaces for system design flexibility and connects easily to Arduino, Raspberry Pi, and other microcontroller boards.From£46.00 (Ex. VAT)
25 In stock
Make an Enquiry
ROHM Accelerometer
£2.15 (Ex. VAT)
20000 In stock
Make an Enquiry
ROHM Accelerometer KX124
Enquire for availability
Make an Enquiry
Sensolute Micro Vibration Sensor MVS0409.02
Sensolute Micro Vibration Sensor MVS0409.02
XProduct SKU: MVS0409.02
Sensolute Micro Vibration Sensor MVS0409.02
DESCRIPTION The micro vibration sensor is used for the detection of slight movements and vibrations by means of a mobile micro sphere. The ball bridges two contacts reducing the resistance between the two external connection pads from several mega ohms (> 30 MOhm) to below 100 Ohms. The sensor is fully passive, requires no signal conditioning, and operates with currents as low as 0.2 µA. With the aid of tool-specific evaluation electronics, the micro vibration sensor controls the operation of movement-sensitive devices. The micro vibration sensor is utilised for converting many systems to environmentally friendly devices by implementing wake-up and powerdown logic to conserve battery power and bringing energy consumption to a minimum, pushing the availability of green technology and green electronics into new areas of design and application. The sensor is typically used for applications such as bike computers, remote controls, electronic lock systems, RFiD transponders, GPS tracking systems, wireless sensor networks, illuminated dog`s collars, access control systems, data loggers, bicycle lights, that are only switched on when in motion. APPLICATIONS - Motion detection - System wake up – low powerFeatures
-Omnidirectional vibration sensor - Halogen free - Wide supply voltage range: 1.80 V to 15 V - Low operating current -e.g. Icc max. 0.2µA at Vcc 2V and R 10Meg) -e.g. Icc max. 2.0µA at Vcc 2V and R 1Meg) - Noiseless - ROn < 100 ? - Protected against environmental stress - Automated SMT-mounting - RoHS compliant, lead free - Specified from -40 °C to +85 °C - Size 2.85 mm x 2.45 mm x 1.7 mm - Reacting point: approx. 50 mgCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Sensolute Micro Vibration Sensor MVS0608.02
Sensolute Micro Vibration Sensor MVS0608.02
XProduct SKU: MVS0608.02
Sensolute Micro Vibration Sensor MVS0608.02
DESCRIPTION The micro vibration sensor is used for the detection of slight movements and vibrations by means of a mobile micro sphere. The ball bridges two contacts reducing the resistance between the two external connection pads from several mega ohms (> 30 MOhm) to below 100 Ohms. The sensor is fully passive, requires no signal conditioning, and operates with currents as low as 0.2 µA. With the aid of tool-specific evaluation electronics, the micro vibration sensor controls the operation of movement-sensitive devices. The micro vibration sensor is utilised for converting many systems to environmentally friendly devices by implementing wake-up and powerdown logic to conserve battery power and bringing energy consumption to a minimum, pushing the availability of green technology and green electronics into new areas of design and application. The sensor is typically used for applications such as bike computers, remote controls, electronic lock systems, RFiD transponders, GPS tracking systems, wireless sensor networks, illuminated dog`s collars, access control systems, data loggers, bicycle lights, that are only switched on when in motion. APPLICATIONS - Motion detection - System wake up - low powerFeatures
- Omnidirectional vibration sensor - Wide supply voltage range: 1.80 V to 15 V - Low operating current (e.g. Icc max. 0.2µA at Vcc 2V and R 10Meg) (e.g. Icc max. 2.0µA at Vcc 2V and R 1Meg) - Noiseless - ROn < 100 Ohm - Protected against environmental stress - Automated SMT-mounting - RoHS compliant, lead free - Specified from -20 °C to +70 °C - Size 2.85 mm x 2.45 mm x 1.7 mm - Reacting point: approx. 50 mgCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Sensolute Micro Vibration Sensor MVS1006.01
Sensolute Micro Vibration Sensor MVS1006.01
XProduct SKU: MVS1006.01
Sensolute Micro Vibration Sensor MVS1006.01
DESCRIPTION The micro vibration sensor is used for the detection of slight movements and vibrations by means of a mobile micro sphere. The ball bridges two contacts reducing the resistance between the two external connection pads from several mega ohms (> 30 MOhm) to below 100 Ohms. The sensor is fully passive, requires no signal conditioning, and operates with currents as low as 0.2 µA. With the aid of tool-specific evaluation electronics, the micro vibration sensor controls the operation of movement-sensitive devices. The micro vibration sensor is utilised for converting many systems to environmentally friendly devices by implementing wake-up and powerdown logic to conserve battery power and bringing energy consumption to a minimum, pushing the availability of green technology and green electronics into new areas of design and application. The sensor is typically used for applications such as bike computers, remote controls, electronic lock systems, RFiD transponders, GPS tracking systems, wireless sensor networks, illuminated dog`s collars, access control systems, data loggers, bicycle lights, that are only switched on when in motion. APPLICATIONS - Motion detection - System wake up – low powerFeatures
- Unidirectional vibration sensor - Wide supply voltage range: 1.80 V to 15 V - Low operating current (e.g. Icc max. 0.2µA at Vcc 2V and R 10Meg) (e.g. Icc max. 2.0µA at Vcc 2V and R 1Meg) - Noiseless - ROn < 100 ? - Protected against environmental stress - Automated SMT-mounting - RoHS compliant, lead free - Specified from -20 °C to +70 °C - Size 2.85 mm x 2.45 mm x 1.7 mm - Reacting point: approx. 50 mgCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry