Embedded Processing & Memor
Showing all 14 results
Microchip - Igloo Family
XProduct SKU: AGLN-NANO-KIT
The Microsemi IGLOO® series of low-power flash FPGAs includes IGLOO/e, IGLOO nano and IGLOO PLUS - the industry's low-power FPGAs. IGLOO FPGA family are designed to meet the demand of low power and small foot print requirements of today's portable and power-conscious electronics. The IGLOO low-power FPGA family support up to 35K logic elements with up to 504 kbits of true dual-port SRAM, up to 6 embedded PLLs, and up to 620 user I/Os. Low-power applications that require 32-bit processing can use the ARM ® Cortex-M1 processor without license fee or royalties in M1 IGLOO devices. The IGLOO FPGA family devices are available in small footprint (3x3, 4x4, 5x5, 6x6 and 8x8 mm), high density, chip-scale and quad flat no-lead packages. The IGLOO series includes: - IGLOO/e with ARM Cortex-M1 - IGLOO nano - IGLOO PLUS
Features
Flash*Freeze Technology
The Flash*Freeze technology used in IGLOO devices enables easy entry and exit from low power mode which consumes as little as 2 µW, while retaining SRAM and register data. Flash*Freeze technology simplifies power management through I/O and clock management without a need to turn off voltages, I/Os, or clocks at the system level.In Flash*Freeze mode, power drops to as low as 2 µW, and no additional components are required to turn off I/Os or clocks while preserving the design information, SRAM content, and registers. I/Os can maintain their state during Flash*Freeze mode. Entering and exiting Flash*Freeze mode takes less than 1 µs.Small Footprint Packages
Microsemi IGLOO low-power FPGAs are true single-chip devices, do not require configuration or other support components, and offer a variety of small-footprint packages with high I/O pin count to match design needs. The Microsemi IGLOO family is offered in a small form factor (3x3, 4x4, 5x5, 6x6, and 8x8 mm), high-density, chip-scale packages and quad flat no-lead packagesSpecifications
Device Comparison
| IGLOO Family | IGLOO/e | IGLOO nano | IGLOO PLUS |
|---|---|---|---|
| ARM - Enabled | M1 IGLOO/e | Â Â | Â Â |
| Overview | The low-power programmable solution | The industry's lowest-power, smallest-size solution | The low-power FPGA with more I/O per LE compared to IGLOO |
| Equivalent LEs | 330-35K | 100-3K | 330-1K |
| Max User I/Os | 620 | 71 | 212 |
| Power Consumption | 5  µW | 2  µW | 5  µW |
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Enquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry
Microchip - SmartFusion 2 Family
XProduct SKU: M2S090TS-EVAL-KIT-P
Microsemi's SmartFusion2 Security Evaluation Kit makes it easy to develop secure embedded systems and provides the best-in-world solutions for both Design Security—when protecting your design IP is critical; and Data Security—when protecting application data is necessary. The kit provides a cost effective SoC field programmable gate array (FPGA) platform for developing cost-optimized SoC FPGA designs using Microsemi's SmartFusion2 SoC FPGAs, which integrate inherently reliable flash-based FPGA fabric, a 166 MHz ARM® Cortex®-M3 processor, advanced security processing accelerators, DSP blocks, SRAM, eNVM, and industry-required high-performance communication interfaces—all on a single chip. In addition, the SmartFusion2 Security Evaluation comes with a large 90K LE device to make it easy to develop transceiver I/O-based FPGA designs to build PCI Express® and Gigabit Ethernet-based systems and also have room for large IP blocks to complement the design. The board is also small form-factor PCIe compliant, which will allow quick prototyping and evaluation using any desktop PC or laptop with a PCIe slot. The kit enables you to: • Evaluate the Data Security features of SmartFusion2 SoC FPGAs including: – Elliptic Curve Cryptography (ECC) – SRAM-PUF (Physically Unclonable Function) – Random Number Generator (RNG) – AES/SHA – Anti-Tamper • Develop and test PCI Express Gen2 x1 lane designs • Test the signal quality of the FPGA transceiver using full-duplex SERDES SMA Pairs • Measure the low power consumption of the SmartFusion2 SoC FPGA • Quickly create a working PCIe link with the included PCIe Control Plane Demo The board includes an RJ45 interface to 10/100/1000 Ethernet, 512 MB of LPDDR, 64 MB SPI Flash, and USB-UART connections, as well as I2C, SPI, and GPIO headers. The kit includes a 12 V power adapter, but can also be powered through the PCIe edge connector. Also included is a free Platinum License for the Libero SoC software toolset to enable FPGA development and to utilize the reference designs made available with the kit.
Features
Kit Contents: 1x SmartFusion®2 system-on-chip (SoC) FPGA 90K LE M2S090TS-FGG484 Evaluation Board 1x USB A male to micro-B male cable 1x 12 V, 2 A AC power adapter 1x Quickstart guide 1x Libero® System-on-Chip (SoC) Platinum software one year license 1x FlashPro4 programmerCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Microchip - SmartFusion Family
XProduct SKU: A2F-EVAL-KIT-2
SmartFusion® System on Chip (SoC) FPGAs are the only devices that integrate an FPGA fabric, ARM Cortex-M3 Processor, and programmable analog circuitry, offering the benefits of full customization and IP protection, while still being easy to use. Based on a proprietary flash process, SmartFusion SoC FPGAs are ideal for hardware and embedded designers who need a true system-on-chip (SoC) solution that gives more flexibility than traditional fixed-function microcontrollers without the excessive cost of soft processor cores on traditional FPGAs. SmartFusion SoC FPGAs provide you with: Full Design Customisability. - Create a product with exactly the features you need - Innovate and differentiate for a competitive edge - Incorporate last-minute changes with an on-chip FPGA fabric - Future-proof your design with in-application programming (IAP) capability for field upgrades - Experiment with hardware acceleration for select algorithms in FPGA fabric Intellectual Property (IP) Protection - Inherent flash FPGA IP security with a complete SoC - Snoop-free interface between microcontroller and FPGA - High design security since no bitstream download is required at power-up - Secure in-system programming (ISP) with 128-bit Advanced Encryption Standard (AES) via JTAG - FlashLock ® to prevent FPGA contents from being read back - Protection against overbuilding with customer programmable device key Ease-of-Use Increases Productivity - A single platform for your entire line of products - Libero SoC integrated design environment for both FPGA and embedded designers - Simple GUI-based configuration of complex programmable analog - Industry leading compile and debug from Keil™, IAR Systems® and GNU - Micrium supports SmartFusion devices with real time operating system (RTOS) and middleware components
Features
Microcontroller Subsystem (MSS) - Hardware industry-standard 100 MHz, 32-bit ARM Cortex-M3 CPU - Multi-layer AHB communication matrix with up to 16 Gbps throughput - 10/100 Ethernet MAC with RMII interface - Two of each: SPI, I2C, UART, 32-bit timers - Up to 512 KB flash and 64 KB of SRAM - External memory controller (EMC) - 8-channel DMA controller - Up to 41 MSS I/Os with Schmitt trigger inputs - 25 I/Os can be used as FPGA I/Os FPGA Fabric - Based on Microsemi's proven ProASIC3 architecture - 60,000 to 500,000 system gates with 350 MHz system performance - Embedded SRAMs and FIFOs - Variable aspect ratio 4,608-bit SRAM blocks - x1, x2, x4, x9 and x18 organizations - True dual-port SRAM (including x18) - Up to 128 FPGA I/Os supporting LVDS, PCI, PCI-X and LVTTL/LVCMOS standards Programmable Analog - High-performance analog signal conditioning blocks (SCB) with voltage, current and temperature monitors - Analog compute engine (ACE) offloads CPU from analog initialization and processing of analog-to-digital conversion (ADC), digital-to-analog conversion (DAC) and SCBs - Integrated ADCs and DACs with 1 percent accuracy - 12-/10-/8-bit mode ADCs with 500/550/600 Ksps sampling rate - Up to ten 15 ns high-speed comparators - Up to 32 analog inputs and 3 outputsCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry38 In stock
Make an EnquiryEnquire for availability
Make an Enquiry
Microchip IGLOO®2 FPGA Family
XProduct SKU: M2GL-EVAL-KIT-P
Microsemi's IGLOO®2 FPGAs, targeted at the cost-optimized FPGA market, integrate fourth generation flash-based FPGA fabric and high performance communications interfaces on a single chip. The IGLOO2 FPGAs offer a cost optimized FPGA with best-in-class feature integration coupled with the lowest power, highest reliability and most advanced security in the industry. Best-In-Class: Integration, Power, Reliability & Security Microsemi Leadership in Cost-Optimized FPGAs - Highest number of 5G transceivers - Highest number of GPIO - Highest number of PCI Compliant 3.3V I/O - Only FPGA with hardened memory subsystem - Only non-volatile and instant-on mainstream FPGA Microsemi Leadership in Low Power FPGAs - 3X lower static power with no performance penalties - Flash*Freeze real-time power management - 25% lower total power Microsemi Leadership in Reliable FPGAs - Only FPGA with SEU immune fabric configuration cells - Extended temperature support (Up to 125degC Tj) Microsemi Leadership in Secure FPGAs - Built-in state-of-the-art design security for all devices - Easy-to-use!
Features
Microsemi's IGLOO2 FPGAs continue the company's focus on addressing the needs of today's cost optimized FPGA markets by providing a LUT based fabric, 5G transceivers, high speed GPIO, block RAM and DSP blocks in a differentiated, cost and power optimized architecture. This next generation IGLOO2 architecture offers up to 5X more logic density and 3X more fabric performance than its predecessors and combines a non-volatile Flash based fabric with the highest number of general purpose I/O, 5G SERDES interfaces and PCI Express end points when compared to other products in its classCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry1670 In stock
Make an Enquiry906 In stock
Make an Enquiry
Microchip-Flashpro SoC Device Programmier
XProduct SKU: FLASHPRO5
The Microsemi FlashPro programming system is a combination of Microsemi FlashPro software and a hardware programmer. Together they provide in-system programming (ISP) for all FPGAs in the IGLOO2, SmartFusion2, RTG4, IGLOO® Series and ProASIC3 Series (including RT ProASIC3), and the SmartFusion, Fusion, ProASICPLUS, and ProASIC families. Flashpro5 is a hardware programmer supporting all SoC FPGA and FPGA devices except ProASICPlus on Windows and SmartFusion2/IGLOO2 devices on Linux Whether you are programming a board containing a single device or multiple devices connected in a chain, you can quickly program and reprogram Microsemi flash FPGAs by connecting to a PC and the target board. FlashPro programmers provide everything you need to program flash FPGAs for compliance with IEEE 1149, using the JTAG port. Click here for more information
CONTACT US FOR VOLUME PRICING
Enquire for availability
Make an Enquiry
Microchip-ProASIC3 FPGA
XProduct SKU: A3P125-TQG144-P
The ProASIC®3 series of FPGAs, which includes ProASIC3/e, ProASIC3 nano, and ProASIC3L, offers a breakthrough in performance, density, and features for today's most demanding high-volume applications. ProASIC3 devices support the ARM - Cortex-M1 soft processor IP core, offering the benefits of programmability and time-to-market. The ProASIC3 families are based on nonvolatile flash technology and support 100 to 35K LEs and up to 620 I/Os. Military grade devices support 3K to 35K logic elements and 32-bit Cortex M1 soft processor implemented in the FPGA.
Features
- Enhanced commercial temperature range - Selectable Schmitt trigger inputs - Hot-swappable and cold-sparing I/Os - Reprogrammable and nonvolatile - 1,024 bits of user flash memory - Single-chip and Instant-ONCONTACT US FOR VOLUME PRICING
Enquire for availability
Make an EnquiryEnquire for availability
Make an Enquiry