The GD30BC2416x is a highly integrated, programmable, low quiescent current power
management integrated circuit (PMIC) that integrates the most common needs for wearables and low power battery applications.
The GD30BC2416x integrates a switching charger of programmable charging current (up to
1.5A) and a synchronous boost converter at Typical 5V output. The IC also includes a 12-bit
ADC for battery gauge monitoring, and a low quiescent current, low noise LDO capable of
delivering 50mA load current.
The device integrates advanced power path management and control that allow the device
to provide power to the system while charging the battery even with poor adapters. The
dynamic power path management automatically balances the currents delivered to the
system and battery charging. A high voltage and over current protection circuit is
implemented in the IC to protect it from high input voltage as high as 20V.
The GD30BC2416x device supports charge current up to 1.5A and termination current down
to 5mA. The maximum charge current is set at a default of 1.5A and is programmable by
connecting an external resistor from ISET pin to ground. The battery is charged using a
standard Li-Ion charge profile with three phases: pre-charge, constant current and constant
voltage regulation.
The device has several power saving modes to increase battery life whether the product is in
storage or in operation. The quiescent current could be as low as 5uA when it is in sleep
mode and thus most battery could sustain more than a year in shelf.
The versatile features of GD30BC2416x allow for it to best used in wearable applications
such as headsets, earbuds and hearing aids, or low battery applications such as smart
watches and fitness accessories, or patient monitors and portable medical equipment.
Features
Extreme low quiescent current, <5uA in sleep mode
Charging features
– Switching charging up to 1.5A maximum current programmable through ISET
– Support variety of battery chemistries, 4.1/4.2/4.3/4.35/4.4V @0.5%
– Full charge cycle: pre-charge, constant current and constant voltage
– Charging current and pre-charging current are all programmable through I2C
Boost converter
– Supportsup to 1A load current
– High efficiency synchronous boost converter @95%
– Output current limit programmable through I2C, 1.6A/1.8A/2.0A/2.2A
Power path management
– Power path management allows simultaneous battery charging and system supply, system discharge priority
– When the system load increases, the charging current is reduced dynamically according to the input current and system voltage
– USB current limit programmable through I2C, 95%/100%/105%/110% @ICCCH + 0.5A (Maximum current 3A)
– Over voltage protection up to 5.6V, VSYS voltage regulation limit: 4.6V
Protection features
– Short Circuit Protection
– Over/Under temperature protection
– Input Over Voltage/Current Protection
– Boost over voltage (OV) during charge @5.5V
– Boost under voltage (UV) when charge/discharge @4.3V
Additional features
– 3.3V LDO support 50mA
– Programmable LED driver
– Low external component count
– Simple I2C compatible interface
