Serial server, 4-port, industrial-rated, with Wi-Fi and accessories
Software and management:
- Remote management: Digi Remote Manager®, SNMP v3 (user installed/managed)
- Local management: Digi Navigator™ discovery and configuration tool, Web UI (HTTP/HTTPS); CLI (Telnet, SSH)
- Management / troubleshooting tools: Digi Navigator discovery and configuration tool, FTP client, SCP, protocol analyzer with PCAP for Wireshark, event logging with syslog and SMTP client, NTP/SNTP, Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute
- Memory: 256 MB RAM, 4 GB Flash
- Security:
- Authentication: TACACS+, LDAP, Enterprise RADIUS
- Ethernet:
- Ports: (2) RJ-45; 10/100/1000 Mbps (auto-sensing)
- Serial:
- Ports: (4) RJ45-10; RS-232 DTE/RS-422/RS-485 capable, software selectable
- RS-232 / EIA-232 Serial Modes: Signal support TXD, RXD, RTS, CTS, DTR, DSR, DCD, RI flow control options: XON/OFF, CTS/RTS, RTS-toggle
- RS-422 / EIA-422 Serial Modes: TX+/-, RX+/-, software termination, pre-delay/post-delay
- RS-485 / EIA-485 Serial Modes: Data+/Data-, software termination, pre-delay/post-delay
- Wi-Fi:
- Module: 1 x 1 SISO dual-band 802.11a/b/g/n/ac (2.4 GHz / 5 GHz)
- Modes: Client mode and access point mode simultaneously
- Clients: Maximum 10 clients (access point mode: regardless of combination of clients and access points)
- Access points: Maximum 2 access points (access point mode: regardless of combination of clients and access points)
- Security: WPA-3/WPA-2 personal, WPA/WPA-2 enterprise
- Connectors: (1) 50 Ω SMA (center pin: male)
- Physical:
- Dimensions (L x W x H): 19.2 cm x 13.4 cm x 3.5 cm (7.56 in x 5.28 in x 1.38 in)
- Package dimensions: 35.5 cm x 20.4 cm x 6.7 cm (13.98 in x 8.03 in x 2.64 in)
- Package weight: 1.3 kg (2.87 lb)
- Status LEDs: Each Ethernet and serial port has two status LEDs; power, signal, Wi-Fi, Ethernet, serial
- Power requirements:
- Power input: Phoenix connector: 9 to 30 VDC, Connector: 2-position rewireable plug with securing screws included
- Power consumption: 9 V at 1.5 A max, 4.5 W typical without Digi CORE modem
- Environmental:
- Operating temperature:
- Standard operating temperature of Connect EZ device: -35 °C to 74 °C (-31 °F to 165 °F)
- Relative humidity: 5% to 95% (non-condensing)
- Operating temperature:
- Approvals:
- Safety: IEC62368-1, CB, EN62311
- Industrial certification: Class 1, Division 2
- Shock / vibration: IEC 60068-2-64 and 60068-2-27
- Environmental: ROH53
- Emissions / Immunity: CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
- Product warranty: 5-year for base Connect EZ device
- Accessories: Includes 2.4 and 5 GHz antenna, power supply and DIN rail clip (DIN rail bracket available separately — 76002093)
What’s in the box
- Digi Connect EZ 4i — serial server, 4-port, industrial-rated, with Wi-Fi and accessories
- Antenna — 2.4 and 5 GHz (29000938)
- Power supply — 12 V, 2.5 A (76002079)
- DIN rail clip (76002095)